Further information for Osram NAV-E 250W SUPER 4Y E40 RWL1 sodium high-pressure lamp
General
Lamp survival rate
95 %
Lamp maintenance factor
80 %
Service life
4 years
Daily operating time
11 h
Compatibility
conventional and electronic ballasts
Recommended operation
EVG POWERTRONIC® PTo 3DIM
Energy saving compared to HQL
up to 50 %
Application areas
Roads, outdoor lighting, industrial facilities
Suitable for
open and closed luminaires
Safety instructions
Disconnect mains power before installation, operation with defective outer piston not permitted, protect from splashing water
Dimmable
The Osram NAV-E 250W SUPER 4Y E40 RWL1 is a sodium vapour high-pressure lamp designed for use in open and enclosed luminaires. It is intended for outdoor lighting as well as industrial applications and is particularly suitable for street lighting. The lamp features high luminous efficacy and stable luminous flux performance throughout its entire service life, making it a reliable light source for applications requiring high operational safety.
Applications
The lamp is intended for use in outdoor installations, where installation must exclusively take place in suitable luminaires to ensure safety and functionality. It is particularly suitable for street lighting, industrial facilities, and other outdoor areas where uniform and sufficient lighting is required. Use in both enclosed and open luminaires is possible, with luminaire selection adapted to specific environmental conditions.
Functions and Equipment in Detail
The NAV-E 250W SUPER 4Y E40 RWL1 offers a lamp survival rate of 95 % at a burning time of 16,000 hours. This means that 95 % of lamps are still functional after this operating period. The lamp maintenance factor is 80 % at 16,000 hours of burning time, according to DIN 13201, describing the efficiency of lighting over its lifetime. The useful life, i.e. the maintenance cycle, is 4 years with a daily operating time of approximately 11 hours. The lamp is dimmable and can be operated with both conventional and electronic ballasts.
Technology Explained Simply
The lamp operates with sodium vapour under high pressure, enabling high luminous efficacy. The light colour is typical for sodium vapour lamps, i.e. yellow-orange, and is suitable for applications where colour rendering is not a priority, but light intensity and energy efficiency are. Energy efficiency is particularly high when the lamp is operated with an EVG POWERTRONIC® PTo 3DIM electronic ballast. When replacing mercury vapour lamps (HQL), energy savings of up to 50 % can be achieved.
Compatibility and Accessories
The lamp is compatible with conventional and electronic ballasts. For optimal energy efficiency, operation with an EVG POWERTRONIC® PTo 3DIM is recommended. Use in suitable luminaires is required, especially for outdoor applications, to ensure safety and functionality.
Installation and Mounting
Before installing the lamp, the mains power must be disconnected to avoid electrical hazards. Operation with a defective outer bulb is not permitted, as this may lead to increased safety risks. The lamp must be protected from splashing water to prevent damage and malfunctions.
Operational Advantages
The lamp offers high reliability and long service life, reducing maintenance costs. High luminous efficacy and energy efficiency result in lower operating costs. Dimmability allows flexible adjustment of light intensity according to specific requirements. Compatibility with various ballasts provides flexibility in system selection.