Osram 4050300015767, EAN: 4050300015767

Osram NAV-E 70W/E E27 High Pressure Sodium Lamp

Illuminants > Discharge lamps > Miscellaneous

Osram NAV-E 70W/E E27 High Pressure Sodium Lamp

Lieske Part No. 450536
Mfg Part No 4050300015767
EAN-Code 4050300015767
Manufacturer Osram
Here only 25,42 EUR
30,25 EUR incl. VAT

Further information for Osram NAV-E 70W/E E27 High Pressure Sodium Lamp

General
Lamp typeHigh pressure sodium-vapour lamp
Power70 W
SocketE27
Service life3 years
Operating time per dayca. 11 h
Application areasRoads, outdoor lighting, industrial facilities
Suitable luminairesopen and closed luminaires
Safety instructionsDisconnect mains power before installation, operation with defective outer piston not permitted, protect from splashing water
Luminous efficacyHigh
The Osram NAV-E 70W/E E27 RWL1 is a sodium vapour high-pressure lamp designed for use in open and enclosed luminaires. This discharge lamp is intended for outdoor lighting, particularly in street and industrial applications, where high luminous efficacy and sufficient service life are required. The lamp is intended for operation in suitable luminaires, with outdoor applications only permitted under protection against splashing water and with an intact outer bulb. Installation requires disconnecting the mains power to ensure no electrical hazards exist.

Applications

The lamp is primarily intended for lighting streets, outdoor areas, and industrial facilities. It is suitable for both open and enclosed luminaire constructions. Outdoor use is only permitted in luminaires providing sufficient protection against splashing water. Use in open luminaires requires special caution, as the outer bulb must not be damaged or defective to ensure safe operation.

Functions and Features in Detail

The NAV-E 70W/E E27 RWL1 offers high luminous efficacy, meaning it produces a relatively large amount of light per watt of electrical power. This is particularly advantageous in applications requiring high light output with low energy consumption. The lamp is equipped with an E27 base, commonly used in standard luminaires for outdoor and industrial lighting. The service life is 3 years with daily operation of approximately 11 hours, corresponding to a maintenance cycle.

Technology Explained Simply

Sodium vapour high-pressure lamps operate through an electric discharge in a gas mixture under high pressure containing sodium. During operation, the sodium is heated and emits light primarily in the yellow-orange spectrum. The designation RWL1 refers to the specific design of the lamp, suitable for use in certain luminaire constructions.

Compatibility and Accessories

The lamp is designed for use in luminaires equipped with an appropriate starting unit. Exact compatibility depends on the specific luminaire design. Use in open luminaires requires special caution, as the outer bulb must not be damaged.

Installation and Mounting

Before installing the lamp, the mains power must be switched off to avoid electrical hazards. Mounting is done into the corresponding luminaire with E27 base. The lamp is not suitable for operation with a defective outer bulb, as this may lead to increased fire or explosion risk. Installation in outdoor luminaires requires sufficient protection against splashing water to ensure functionality and safety.

Operational Advantages

The high luminous efficacy of the lamp results in efficient lighting, particularly in applications requiring illumination of large areas. The service life of 3 years with daily operation of approximately 11 hours reduces maintenance frequency and associated costs. Use in suitable luminaire constructions enables safe and reliable operation throughout the lamp's entire lifecycle.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/450536
qrcode für Osram NAV-E 70W/E E27 High Pressure Sodium Lamp