| General |
| Lamp type | High pressure sodium-vapour lamp |
| Socket | E27 |
| Service life | 3 years |
| Operating time per day | ca. 11 h |
| Luminous efficacy | High |
| Ignition unit | Integrated |
| Application areas | Roads, outdoor lighting, industrial facilities |
| Suitable luminaires | closed and open luminaires |
| Outdoor application | only in suitable luminaires |
| Safety instructions | Do not stare into the switched-on light source, disconnect mains power before installation, operation with defective outer sleeve not permitted, protect from splashing water |
The Osram NAV-E 50W/I E27 RWL1 is a sodium vapour high-pressure lamp with integrated ignition unit, designed for use in outdoor and industrial lighting. This type of lamp is particularly suitable for street lighting, outdoor installations, and industrial applications where high luminous efficacy and long service life are required. The lamp features an E27 base, which is used in numerous standard luminaires, and is suitable for both enclosed and open luminaires. For outdoor applications, however, an appropriate luminaire design is required to ensure the necessary protection conditions.
Applications
The lamp is primarily intended for use in public streets, industrial halls, warehouses, and other large-area outdoor installations. The high luminous efficacy enables efficient lighting of large areas with low energy consumption. Use in outdoor environments requires a corresponding luminaire design that protects against splashing water and meets safety requirements. The lamp is not suitable for use in living rooms or indoor areas with high pedestrian traffic, as the light colour and glare effects impose specific requirements on positioning and protection of the light source.
Functions and Equipment in Detail
The NAV-E 50W/I E27 RWL1 features an integrated ignition unit, enabling operation without additional ignition devices. This simplifies installation and reduces the number of components required in luminaire construction. The service life is 3 years at a daily operating time of approximately 11 hours, corresponding to typical use in public lighting installations where lamps are often in operation for several years. The integrated ignition unit ensures reliable start-up and minimizes failure risks associated with external ignition systems.
Technology Explained Simply
Sodium vapour high-pressure lamps produce light through electrical discharge in sodium vapour under high pressure. The light colour is yellow-orange, typical for street lighting. The integrated ignition unit ensures the lamp ignites without additional electronic or mechanical ignition aids. The operating voltage is supplied via the network, with the lamp designed for use in public power grids. The luminous efficacy is high, meaning a large amount of light is produced per watt of electrical power. This is particularly advantageous for large-area lighting tasks, where energy efficiency and operating costs are important.
Compatibility and Accessories
The lamp is suitable for luminaires with E27 base, which are widely used in industry and public sectors. It can be used in enclosed and open luminaires, although for outdoor applications a luminaire with sufficient protection against splashing water is required. Compatibility is therefore limited to standard luminaire constructions with E27 base.
Installation and Mounting
Before installing the lamp, the mains power must be switched off to avoid electrical hazards. The luminaire must be positioned such that continuous staring into the illuminated light source from a distance of less than 4 metres is not expected. This is a safety requirement to prevent glare and potential eye damage. Operation with a defective outer bulb is not permitted, as this may lead to increased risk of breakage or gas release. The lamp is not designed for use in wet or damp environments without appropriate protection.
Operational Advantages
The high luminous efficacy of the lamp leads to efficient lighting of large areas with low energy consumption. The integrated ignition unit reduces the complexity of luminaire construction and minimizes the number of required components. The service life of 3 years at a daily operating time of approximately 11 hours ensures long operational duration and reduces maintenance frequency. The lamp is therefore particularly suitable for applications requiring reliable and low-maintenance lighting over an extended period.