Norbert Kordes H05V-U0,75GR-R100

Norbert Kordes H05V-U0,75GR-R100 cable 0,75 mm² grey 100 m

Cables > Installation systems and industrial management > Wiring cable H05 / 07V-U / R

Norbert Kordes H05V-U0,75GR-R100 cable 0,75 mm² grey 100 m

Lieske Part No. 717343
Mfg Part No H05V-U0,75GR-R100
EAN-Code
Manufacturer Norbert Kordes
Here only 23,95 EUR
28,50 EUR incl. VAT

Further information for Norbert Kordes H05V-U0,75GR-R100 cable 0,75 mm² grey 100 m

General
Nominal voltage300/500 V
Test voltage2000 V
Installation temperature range+5 °C - +70 °C
Temperature range after installation-30 °C - +70 °C
Operation temperature+70 °C
Bending radius15 x cable diameter
Flame retardancyVDE 0472 T. 804 test type B (IEC 332-1)
ConductorCopper bare, solid
InsulationPVC according to VDE 0207
Sheath colourgrey, according to VDE 0293-308
The wiring cable H05V-U 0.75GR from Norbert Kordes is a PVC-insulated single-core cable for use in internal wiring of devices and for protected installation in and on luminaires, in conduits, in pipes, on and under plaster. It is specifically designed for bell and signal systems and complies with standards for wiring cables in the field of electrical installation. The cable features a bare, single-strand copper conductor and PVC insulation in accordance with VDE 0207. The sheath colour corresponds to standard VDE 0293-308 and is grey, corresponding to RAL 7000.

Applications

The cable is intended for use in protected indoor environments, particularly in electrical installations for signal and bell systems. It is suitable for installation in conduits, pipes, on or under plaster, as well as for internal wiring of devices. Use is restricted to areas where no direct mechanical or chemical stress occurs. The cable is not intended for outdoor use or in damp environments, as no special protection ratings such as IP67 or similar are specified.

Functions and Features in Detail

The cable consists of a bare, single-strand copper conductor, ensuring high electrical conductivity. The PVC insulation provides reliable electrical protection and is manufactured in accordance with VDE 0207. The sheath colour is grey, complying with standard VDE 0293-308 and enabling clear identification of the cable. The cable is rigid, implying limited flexibility, but sufficient for the intended applications.

Technical Explanation

The rated voltage is 300/500 V, meaning the cable is designed for electrical installations with voltages up to 500 V AC. The test voltage of 2000 V serves for safety testing and ensures that the insulation does not break down under increased voltage. The maximum operating temperature is +70 °C, and the cable may be installed at temperatures between +5 °C and +70 °C. After installation, the ambient temperature may range between -30 °C and +70 °C. The minimum bending radius is 15 times the cable diameter, which must be considered during installation to avoid damaging the insulation. Flame retardancy corresponds to test method B according to VDE 0472 Part 804 (equivalent to IEC 332-1), meaning the cable does not sustain flame propagation during a flame test and thus presents limited fire hazard.

Compatibility and Accessories

The cable is designed for use in signal and bell systems and can be combined with appropriate connectors, terminals, and other connection elements suitable for PVC-insulated cables.

Installation and Mounting

Installation takes place in protected indoor environments, where the cable can be laid in conduits, pipes, on or under plaster. The installation must ensure that the minimum bending radius of 15 times the cable diameter is maintained to avoid damaging the insulation. The cable is not intended for outdoor use or in damp environments. Installation is performed at temperatures between +5 °C and +70 °C, with an ambient temperature range of -30 °C to +70 °C after installation.

Operational Advantages

The cable provides reliable electrical conduction with high insulation quality and flame-retardant properties. The PVC insulation ensures long-term protection against electrical breakdown, and the test voltage of 2000 V ensures safety during installation. The maximum operating temperature of +70 °C allows use in a wide range of indoor applications, and flame retardancy according to VDE 0472 Part 804, test method B, reduces fire risk in case of short circuit or overload. The grey sheath colour facilitates identification and proper installation in complex systems.

The cable is supplied in a length of 100 metres as a coil, enabling continuous installation without additional connections. Use is restricted to protected indoor environments and for the intended applications in bell and signal systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/717343
qrcode für Norbert Kordes H05V-U0,75GR-R100 cable 0,75 mm² grey 100 m