T-piece, with corrugated, round and unperforated side rails, with connector holes for connection, dimensionally stable due to riveted, upwardly open C-profile rungs with 16 mm slot width, for wide-span cable trays, for producing 90° T-outlets. Please order joint connector WSV 105.390 separately. The fitting radii are designed so that the cables can be laid in accordance with DIN/VDE 0298 Part 3. Suitable clamp clamps (B... and BK...) can be found in the KI catalog. Joints must be supported in the immediate vicinity by an appropriate supporting structure. Can be used for: Wide span cable ladder WSL 105... Dimensions (approx. dimensions) Height H x Width W: 105 x 300 mm Length in main direction: 1500 mm + W Length in exit direction: 750 mm + W Inner beam radius R: 500 mm Material: Steel, strip galvanized according to DIN EN 10346