General
Material	Steel, galvanised
Mounting technique	keyhole technology
Clear internal height	114,5 mm
Clear internal width	90 mm
Maximum occupancy	80 Cables NYM 3x1.5 mm²
Norm	DIN EN 10346

The SHS 80 S cable holder from Niedax is a mounting component for securing cable bundles to walls and ceilings. It ensures safe and structured routing of electrical cables and is specifically designed for use in installations requiring high mechanical strength. The holder enables quick installation thanks to the keyhole technology, which allows mounting without drilling or additional tools. The construction from strip-galvanised steel in accordance with DIN EN 10346 ensures high corrosion resistance and long service life under normal environmental conditions.

Applications

The SHS 80 S is intended for use indoors, particularly in areas where cables are routed along walls or ceilings. It is suitable for securing cable bundles in electrical installations, for example in residential and commercial buildings. When used in functional safety applications or in suspended ceilings with fire protection requirements according to the Model Wiring Regulations MLAR 2/2015, additional regulations must be observed, depending on the project requirements.

Functions and Equipment in Detail

The cable holder features a clear internal height of 114.5 mm and a clear internal width of 90 mm, providing sufficient capacity for multiple cables. The maximum capacity is 80 cables of type NYM 3x1.5 mm², enabling use in medium to large installations. The keyhole technology allows for quick and secure mounting on substrates such as plasterboard or plaster, with installation possible without drilling. The construction from strip-galvanised steel ensures high mechanical strength and resistance to mechanical stress.

Technology Explained Simply

The keyhole technology is based on a special mounting principle, where the holder is inserted into an opening in the substrate that is shaped with a keyhole profile. This enables quick installation without drilling and significantly reduces installation time. The material, steel strip-galvanised in accordance with DIN EN 10346, provides sufficient corrosion protection, which is adequate under normal indoor conditions. The clear internal dimensions of 114.5 mm height and 90 mm width are designed for accommodating cable bundles, with the maximum capacity of 80 NYM 3x1.5 mm² cables defining the capacity.

The cable holder is designed for securing cable bundles to walls and ceilings. The keyhole technology enables quick installation, and the strip-galvanised steel ensures mechanical strength and corrosion protection.

Compatibility and Accessories

The SHS 80 S is designed for use with cables of type NYM 3x1.5 mm². The maximum number of cables is 80, enabling use in standard installations. Use in combination with other mounting components or cable profiles is possible, provided mechanical and structural requirements are met.

Mounting and Installation

Installation is performed using the keyhole technology, where the holder is inserted into a correspondingly shaped opening in the substrate. This requires no drilling and allows for quick mounting. The holder is mounted on walls or ceilings, with the mechanical strength of the steel ensuring load capacity. The clear internal dimensions of 114.5 mm height and 90 mm width are designed for cable accommodation, with the maximum capacity of 80 NYM 3x1.5 mm² cables defining the capacity.

Operational Advantages

The SHS 80 S offers quick and secure installation via keyhole technology, reducing installation time. The high mechanical strength and corrosion protection provided by strip-galvanised steel ensure long service life. The capacity for 80 NYM 3x1.5 mm² cables makes it suitable for medium to large installations. Use in indoor environments under normal conditions is straightforward, although additional regulations must be observed for special requirements such as functional safety or fire protection.