Cable tray, lightweight, in accordance with DIN EN 61537, with embossed joint connector for screwless quick fastening and with offset base and side perforations for stepless fastening and attachment of the system components, base additionally corrugated and provided with a continuous central keyhole perforation for suspension with threaded rods M 10/..., in addition, a 4-row base perforation arranged symmetrically from the center enables the insertion of cable screw connections, two rows of T-outlets also symmetrically installed in the base enable the cable ties to be quickly fastened by looping them in from above (no threading required). VDE certified! Dimensions (approx. dimensions) H x W : 60 x 600 mm Material thickness t : 0.9 mm Keyhole perforation : 7 x 40 mm and Ø 11 mm Spacing : 62.5 mm Inner symmetrical row of bottom holes : Ø 20.5 mm and Ø 25.5 mm Symmetrical spacing : 120 mm Spacing : 250 mm Outer symmetrical row of bottom holes : Ø 13.5 mm and Ø 16.5 mm Symmetrical spacing : 545 mm Spacing : 125 mm T-outlets : 14 x 30 mm Symmetrical spacing : 140 mm Spacing : 250 mm Delivery length L : 3000 mm Usable cross-section : 35800 mm² Material : Steel, strip galvanized according to DIN EN 10346