Cable tray, lightweight, in accordance with DIN EN 61537, with embossed joint connector for screwless quick fastening and with offset base and side perforations for stepless fastening and attachment of the system components, base additionally corrugated and provided with a continuous central keyhole perforation for suspension with threaded rods M 10/..., in addition, a 4-row base perforation arranged symmetrically from the center enables the insertion of cable screw connections, two rows of T-outlets also symmetrically installed in the base enable the cable ties to be quickly fastened by looping them in from above (no threading required). VDE certified! Dimensions (approx. dimensions) H x W : 60 x 500 mm Material thickness t : 0.9 mm Keyhole perforation : 7 x 40 mm and Ø 11 mm Spacing : 62.5 mm Inner symmetrical bottom hole row : Ø 20.5 mm and Ø 25.5 mm symmetrical spacing : 120 mm Spacing : 250 mm Outer symmetrical bottom hole row : Ø 13.5 mm and Ø 16.5 mm symmetrical spacing : 445 mm Spacing : 125 mm T-outlets : 14 x 30 mm symmetrical spacing : 130 mm Spacing : 250 mm Delivery length L : 3000 mm Usable cross-section : 29800 mm² Material : Steel, strip galvanized according to DIN EN 10346