GRP cable tray, pressed, with unperforated side rails, with molded connector and five rows of fastening holes in the base, mechanical strength in accordance with IEC 61537, please order appropriate fastening accessories separately, halogen-free. An expansion distance of 8 mm must be taken into account. Due to the expansion of the material, the following must be observed during assembly: - The cable tray should not be screwed close to or at the joint. - When screwing the cable tray onto the brackets, a through hole of Ø 9 mm for the FKM 6X20 E4 screws must always be made in the tray. Article also available in ...AC (resin mixture with acrylic resin). Dimensions (approx. dimensions) H x W : 50 x 150 mm Material thickness t : 3 mm Bottom holes : 9 x 20 mm Row spacing : 25 mm bottom hole spacing Grid dimension : 313 mm Load capacity F at a support spacing of 1.5 m : 0.3 kN/m Delivery length : 3000 mm Usable cross-section : 5896 mm² Material : UP-GF (glass fiber reinforced polyester) Color : pebble gray RAL : 7032 (similar)