GRP level, pressed, 2-part, with unperforated side rails and molded connectors, for vertical height offset, please order appropriate fastening accessories separately, halogen-free. During assembly, ensure that the level is supported at each cable tray access and in the middle with brackets. If the width is > 400 mm, an additional central support should be provided. To ensure proper assembly, the connectors must be screwed to each cable tray access with 2 FKM 6X16 E4. Depending on the standard variants used, the level can have different lengths depending on the height. By cutting the individual parts to length, a variable adaptation to the local conditions is possible. Item also available in ...AC (resin mixture with acrylic resin). Delivery: unassembled Use for: GRP cable tray KK 80... GRP cable tray KKL 80... Dimensions (approx. dimensions) H x W: 80 x 400 mm Standard variants: H1 = 160 mm and L1 = 780 mm H2 = 480 mm and L2 = 1100 mm H3 = 800 mm and L3 = 970 mm Material: UP-GF (glass fiber reinforced polyester) Color: pebble gray RAL: 7032 (similar)