GRP cable tray, pressed, with unperforated side rails and base, with molded connector, mechanical strength in accordance with IEC 61537, please order appropriate fastening accessories separately, halogen-free. An expansion distance of 8 mm must be taken into account. Due to the expansion of the material, the following must be observed during assembly: - The cable tray should not be screwed close to or at the joint. - When screwing the cable tray onto the brackets, a through hole of Ø 9 mm for the FKM 6X20 E4 screws must always be made in the tray. Article also available in ...AC (resin mixture with acrylic resin). Dimensions (approx. dimensions) H x W : 50 x 200 mm Material thickness t : 3 mm Load capacity F at a support distance of 1.5 m : 0.3 kN/m Delivery length : 3000 mm Usable cross-section : 8096 mm² Material : UP-GF (glass fiber reinforced polyester) Color : pebble gray RAL : 7032 (similar)