Hanging support, with welded head plate and U-profile perforated on 3 sides, system HU 6040/..., for booms KTAL..., KTAM..., KTA... and KTAS... as well as KTCL... and KTC... in conjunction with hanging support hanging support, U-profile perforated on 3 sides with welded head plate, system HU 6040/..., for booms for one-, two- and three-sided installation, in order to prevent deformation of the hanging support profile when installing the boom, the hanging support spacer profile HDS 60.40 F with hexagon screw must be taken into account for static reasons, when attaching the boom to the hanging support profile on one side, the closed side of the boom should preferably be aligned with the profile web of the hanging support. For static reasons and to enable the protective cap to be fitted without any problems, the boom must be mounted at a distance of x=50 mm (bottom edge of boom to end of hanging post), above the end of the hanging post. Please observe additional regulations for use in functional maintenance! VDE certified! for boom: KTAL... KTAM... KTA... KTAS... for boom: KTAS 100 - 400 (functional retention/KFO) Dimensions (approx. dimensions) Head plate L x W xt: 200 x 80 x 6 mm Fixing holes: 13 x 28 mm Center distance: 152 mm U-profile: 40 x 60 x 40 mm Material thickness t: 4 mm Three-sided profile holes, single row: 13 x 40 mm Center distance: 50 mm Total length L: 1106 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461