Hanging support, I 80 profile according to DIN 1025 with welded head plate, system HI 80/..., for clamping brackets, for installation on one or both sides (horizontally at the same height or at an offset height). For static reasons and to enable the protective cap to be fitted without any problems, the bracket must be installed at a distance of x=50 mm (bottom edge of the bracket to the end of the hanging support), above the end of the hanging support. Attention: Limited space for fitting cable trays (length of the hanging support minus the height of the bracket)! VDE certified! for boom: KTT... = 600 mm length KTTS... = 1000 mm length Dimensions (approx. dimensions) Head plate L x W x t: 200 x 80 x 6 mm Fixing holes: 13 x 28 mm center distance: 152 mm Fixing holes: 13 x 38 mm center distance: 50 mm I-profile: 80 x 42 mm Profile holes, single row: 13 x 75 mm center distance: 100 mm Total length L: 206 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461