GRP hanging support, pultruded, made with particularly durable acrylic resin, two vertical double C-profiles with screwed-on horizontal C-profile fastening rail, for cantilever fastening on both sides, please order proportional fastening accessories FPBGV 10 E4 separately, halogen-free. GRP hanging supports FPDS.../AC have limited space for cable tray fitting ('L' hanging support minus 'H' cantilever). The tensile load specifications only apply if the structure is sufficiently anchored to the supporting subsurface. The introduction of loads into the structure must be agreed with the construction management. The applicable guidelines and regulations must be observed. Use for: boom FPAM.../AC = 300 mm length FPAP.../AC = 600 mm length Dimensions (approx. dimensions) C-profile mounting rail H x W x L: 53 x 53 x 210 mm Mounting holes: 2 x Ø 11 mm center distance: 160 mm two vertical C-profiles H x W x L each: 45 x 45 x 500 mm Material thickness of C-profile leg: 5 mm Material thickness of C-profile back: 8 mm Slot width: 15 mm Total length of hanging post L1: 553 mm Maximum tensile load on both sides each: 1.5 kN Material: UP-GF (glass fiber reinforced polyester) Color: pebble gray RAL: 7032 (similar)