Further information for Niedax DAM6X5 through-anchoring bolt M6 thick-layer passivated
NIEDAX - Make: DAM 6X5
Through anchor, steel, galvanized to DIN 50961, passivated, including galvanized nut and galvanized washer. For use in the functional integrity please follow additional rules! Permissible loads for train-centric, cross and shear loading at any angle and anchor characteristics and dimensions for concrete strength> = B 25 and C 20 / 25th When calculating the
entire certification No.: ETA-06/0175 to note! For outdoor use, we recommend anchor made of stainless steel!
Dimensions:
permissible load of single anchors: 1.6 kN
Permissible bending moment M: 4 Nm
max. Torque when attaching the fixture with torque =
Key M (D): 4 Nm
Nominal drill hole diameter d (0) = 6 mm
Cutting diameter of <= 6,4 mm
Through hole in the subsequent
Component d (f) <= 7 mm
minimum hole depth h (0)> = 40 mm
minimum anchoring depth h (v)> = 30 mm
Center distance between the outer anchors of adjoining groups
or single anchors az> = 200 mm
Spacing of the outer anchor
to the component edge ar> = 100 mm
Minimum thickness d (a) = 80 mm
Total length l = 50 mm
Fixture thickness t fix <= 5 mm
Certificate No.:. ETA-06/0175
Scope: The anchor may as multiple fixing for the anchorage for suspended ceilings and suspended ceilings according to DIN 18168, as well as for static anchors similar to 1 kN / mý - used - even in the tension zone generated from load voltages.
NIEDAX model no. DAM 6x5
Type: DAM6x5
Item: 100 ST.