| General |
| Thickness flange | 14 - 20 mm |
| Pipe diameter | 29 - 33 mm |
| Impact depth | 26,6 mm |
| Load bearing capacity | 0,07 kN |
| Material | steel, mechanically galvanized/passivated |
| Surface treatment | Mechanically galvanized/passivated |
| Norm | DIN EN ISO 9227 |
The E-Clips flange claw with pipe clip, type AH1420-JM2933, from Niedax is a fastening element for pipe suspension on carrier flanges. It is hammered into place and enables the secure fastening of pipes with a diameter of 29 to 33 mm to flanges with a thickness of 14 to 20 mm. The product is made of steel and is mechanically galvanized and passivated in accordance with DIN EN ISO 9227, ensuring a corrosion-resistant surface. The flange claw features a rotatable pipe clip, allowing flexible adjustment to different pipe positions.
Applications
The flange claw is specifically designed for use in electrical and installation technology, where pipes must be fastened to metallic carrier flanges. Typical applications include the mounting of conduit pipes, cable ducts, or other installation components in industrial, commercial, or commercial-technical environments. The design allows for quick and tool-free installation, with a hammer being the only required tool.
Functions and Equipment in Detail
The pipe clip is rotatably mounted on the flange claw, allowing it to adapt to the respective pipe position. The driving depth is 26.6 mm, ensuring secure anchoring in flanges of the specified thickness. The load capacity of the element is 0.07 kN, which is sufficient for fastening lightweight pipe lines. The mechanical galvanization and passivation according to DIN EN ISO 9227 provide enhanced corrosion protection, especially in environments with increased humidity or low aggressiveness.
Technology Explained Simply
The flange claw is driven into the flange using a hammer, anchoring it securely. The rotatable design of the pipe clip allows adjustment to different angles and positions of the pipe to be fastened. The use of steel as the material ensures sufficient strength, while the surface treatment increases service life in operation. The specific dimensions for flange thickness (14–20 mm) and pipe diameter (29–33 mm) ensure a precise fit and prevent shifting or loosening of the fastening.
Compatibility and Accessories
The product is designed for pipes with a diameter of 29 to 33 mm and can be mounted on flanges with a thickness of 14 to 20 mm. No special accessories are required, as installation is done exclusively with a hammer. The rotatable design of the pipe clip allows use in various angular positions, increasing flexibility during installation.
Installation and Mounting
Installation is performed by hammering the flange claw into the carrier flange. The driving depth of 26.6 mm must be maintained to ensure secure anchoring. The pipe clip is then closed around the pipe to be fastened. The rotatable design allows adjustment to the specific pipe position, achieving precise alignment. No additional tools or aids are required.
Operational Advantages
The E-Clips flange claw offers quick and tool-free installation, reducing installation time. The rotatable design of the pipe clip allows flexible adjustment to different pipe positions. The mechanical galvanization and passivation provide increased corrosion resistance, extending service life in operation. The load capacity of 0.07 kN is sufficient for fastening lightweight pipe lines in typical installation scenarios.