Netsys NV-520G

Netsys NV-520G VDSL2 converter 4-Port industrial

Netsys NV-520G VDSL2 converter 4-Port industrial

Lieske Part No. 2128838
Mfg Part No NV-520G
EAN-Code
Manufacturer Netsys
Here only 178,80 EUR
212,77 EUR incl. VAT

Further information for Netsys NV-520G VDSL2 converter 4-Port industrial

General
Number of Ethernet ports4 piece
Ethernet port typeRJ45 -
Ethernet data rate10/100/1000 Mbps
VDSL2 port typeRJ11 -
Maximum bandwidth160 Mbps
VDSL2 standardITU-T G.993.2 -
VDSL2 profiles35b -
Operating voltage12 to 48 V DC
Redundant power supplyYes -
Alarm contactYes -
Over voltage protectionYes -
Overload protectionYes -
Reverse polarity protectionYes -
Degree of protectionIP30 -
Operation temperature-20 to 70 °C
Mounting methodDIN rail mounting -
FanlessYes -
ConfigurationVia DIP switch -
Operating modeCO (Master) / CPE (Slave) -
Maximum range3 km
The Netsys NV-520G is a VDSL2 industrial CO/CPE converter designed for use in industrial environments. It enables network connections over distances up to 3 km via existing telephone lines, providing four Gigabit Ethernet ports (10/100/1000 Mbps). The devices can be operated in Master or Slave mode, with configuration done via DIP switches. The device is suitable for industrial applications such as IP surveillance, factory automation, railway stations, weather stations, parking systems, or prison facilities.

Applications

The NV-520G is designed for industrial applications requiring a reliable, long-lasting, and robust network connection over existing VDSL2 lines. It is particularly suitable for point-to-point connections in environments with high demands on operational safety, such as production facilities, transportation systems, or the public sector. The support for CO (Master) and CPE (Slave) modes enables flexible network architectures, where one device acts as the central unit and the other as the end device.

Functions and Equipment in Detail

The device features four RJ45 ports, each supporting data rates of 10/100/1000 Mbps. The VDSL2 connection is made via an RJ11 port, enabling transmission over telephone lines. The maximum bandwidth is 160 Mbps symmetrically, according to the VDSL2 profile (35b) of the ITU-T G.993.2 standard. Configuration as Master or Slave is done via DIP switches, allowing for simple and quick commissioning without additional software.

Technology Explained Simply

The NV-520G uses VDSL2 technology to transmit data over existing copper lines, with a maximum range of up to 3 km. Data transmission is symmetric, meaning download and upload speeds are equal. The devices are fanless, avoiding noise interference and increasing service life. The operating temperature ranges from -20 °C to 70 °C, enabling use in extreme environments. The protection rating IP30 safeguards against access with tools and against solid foreign objects larger than 2.5 mm, but does not protect against water or dust.

Compatibility and Accessories

The converter is compatible with the ITU-T G.993.2 VDSL2 standard specification. It supports redundant power supply, allowing two independent voltage sources in the range of 12 V DC to 48 V DC to be connected. This increases system availability, as the second source takes over in case of a power failure. Additionally, integrated surge, overload, and reverse polarity protection safeguards the device from damage. An alarm contact enables integration into monitoring systems.

Mounting and Installation

Mounting is done via DIN rails, enabling quick and secure installation in enclosures or rack systems. The devices are designed for industrial environments and require no special mounting tools. Configuration is done via DIP switches, eliminating the need for additional software or configuration tools.

Advantages in Operation

The NV-520G offers a reliable and cost-efficient solution for extending Ethernet networks over existing VDSL2 lines. The fanless design reduces maintenance requirements and noise emissions. Support for redundant power supplies increases system availability. The robust construction with an extended temperature range and integrated protection functions ensures stable operation in demanding industrial environments. Simple mounting and configuration reduce commissioning time and installation effort.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2128838
qrcode für Netsys NV-520G VDSL2 converter 4-Port industrial