Netsys NV-202P

Netsys NV-202P VDSL2 converter 2-Port CO/CPE

Netsys NV-202P VDSL2 converter 2-Port CO/CPE

Lieske Part No. 606454
Mfg Part No NV-202P
EAN-Code
Manufacturer Netsys
Here only 190,80 EUR
227,05 EUR incl. VAT

Further information for Netsys NV-202P VDSL2 converter 2-Port CO/CPE

General
Number of RJ45 ports2
RJ45 port speed10/100 Mbps
RJ11 port1
Maximum bandwidth100 Mbps
Transmission range3 km
PoE standardIEEE802.3af and IEEE802.3at
ConfigurationVia DIP switch
Operating modeCO (Master) or CPE (Slave)
HousingMetal
MountingIntegrated wall mounting, optional DIN rail mounting
Power supply12V/1A DC or 48V DC
Scope of deliveryincluding power adapter
VDSL2 technologyYes
Over voltage protectionYes
The Netsys NV-202P is a 2-port VDSL2 bridge converter designed for transmitting Ethernet data over existing two-wire lines such as telephone cables. The device connects two network endpoints in a Point-to-Point topology and enables the use of VDSL2 technology for data transmission with a maximum bandwidth of 100 Mbps. It is suitable for use in office and carrier environments where a cost-effective and reliable connection over existing cable infrastructure is required. The converter supports both the role as CO (Master) and as CPE (Slave) and can be configured via DIP switches to adjust parameters such as transmission speed and interleaving settings.

Applications

The NV-202P is suitable for connecting network devices over existing telephone lines, particularly in buildings where new cable installation is not economically or technically feasible. The maximum range is 3 km, with the actual bandwidth depending on line configuration, cable quality, and environmental conditions. Typical applications include small and medium-sized enterprises, connecting locations within a building or between adjacent buildings, as well as carrier environments for extending network infrastructure.

Features and Equipment in Detail

The device features two RJ45 ports with 10/100 Mbps Ethernet support, used for connecting computers, switches, or other network devices. An RJ11 port serves as the interface for VDSL2 transmission over the two-wire line. The device supports PoE (Power over Ethernet) according to IEEE802.3af and IEEE802.3at standards, enabling connected devices to be powered through the network cable. Configuration is performed via DIP switches, which control the operating mode (CO/CPE), speed, and interleaving settings.

Technology Explained Simply

VDSL2 (Very-high-bit-rate Digital Subscriber Line 2) is a technology for data transmission over copper lines, enabling higher speeds than conventional DSL technologies. The NV-202P uses this technology to transmit Ethernet data over existing telephone lines. The maximum bandwidth of 100 Mbps is sufficient for many office applications, especially when the line length is under 3 km. Support for interleaving enables improved error correction on longer or disturbed lines, increasing connection stability. The surge protection safeguards the device against electrical disturbances caused by lightning strikes or other voltage spikes.

Compatibility and Accessories

The converter is designed for Point-to-Point connections, with one device configured as CO (Master) and the other as CPE (Slave). An external splitter is optionally available to enable simultaneous transmission of telephone signals and data over the same line. Installation is performed either via the integrated wall bracket in the metal housing or optionally via DIN rail mounting, facilitating installation in enclosures or server rooms.

Installation and Mounting

Installation involves connecting the RJ45 ports to network devices and the RJ11 port to the existing two-wire line. Configuration via DIP switches is performed before commissioning. The device is powered by the included power supply. The integrated wall bracket allows for quick mounting on walls, while the optional DIN rail mounting enables flexible installation in enclosures.

Advantages in Operation

Using the NV-202P allows existing copper lines to be used for data transmission, saving costs associated with new cable installations. PoE support reduces the need for additional power supplies for connected devices. Simple configuration via DIP switches and robust construction with a metal housing and surge protection ensure reliable and low-maintenance operation. The maximum range of 3 km makes the device suitable for larger building complexes or connections between adjacent buildings.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/606454
qrcode für Netsys NV-202P VDSL2 converter 2-Port CO/CPE