| General |
| Number of Ethernet ports | 2 |
| Ethernet port speed | 10/100 Mbps |
| VDSL2 port | RJ11 |
| Maximum bandwidth | 100 Mbps |
| VDSL2 standard | ITU-T G.993.2 |
| Operating voltage | 12 V |
| Electricity consumption | 1 A |
| Degree of protection | Overvoltage protection |
| Mounting | Wall mounting, optional DIN rail |
| DIP switch | CO/CPE mode, Speed, Interleave |
| Packet size | 1536 Bytes |
| Transmission range | 3 km |
| Cable type | 24 gauge telephone cable |
| Scope of delivery | Switching power supply |
The Netsys NV-202 is a 2-port VDSL2 bridge converter designed for data transmission over existing telephone lines in commercial and industrial applications. The device enables the use of VDSL2 technology with a maximum symmetric bandwidth of 100 Mbps, with data transmission over a two-wire line with 24 gauge. The VDSL2 technology is based on the ITU-T G.993.2 standard and is designed for point-to-point connections up to a range of 3 km. The device features two RJ45 Ethernet ports with a speed of 10/100 Mbps, which can be used to connect to networks or end devices. The VDSL2 port is implemented as an RJ11 connector, which connects directly to a telephone line.
Applications
The NV-202 is particularly suitable for applications where cost-effective but powerful data transmission over existing copper lines is required. Typical use cases include extending fibre-optic backbone networks to the last metre into buildings or apartments, for example for Triple-Play services (Video, Voice, Data) or corporate networks. Use in telecommunications infrastructure allows combining the benefits of high VDSL2 bandwidth with the availability of existing telephone lines.
Functions and Equipment in Detail
The device supports both CO mode (Central Office, Master) and CPE mode (Customer Premises Equipment, Slave), with selection via a DIP switch. This enables flexible setup depending on the network architecture. Additionally, the transmission speed and interleaving mode can be adjusted via the DIP switch, allowing performance and connection stability to be adapted to the respective line conditions. Support for packet sizes up to 1536 bytes improves data transmission efficiency, especially for larger data packets.
Technology Explained Simply
VDSL2 technology uses the frequency bands of a telephone line to transmit data at high speed without affecting telephony. The maximum bandwidth of 100 Mbps is achieved with the VDSL2 profile (30a), with actual speed depending on line length and quality. A range of up to 3 km is achieved using 24 gauge telephone cables, with signal quality decreasing with increasing distance. The surge protection protects the device from electrical disturbances caused by lightning strikes or voltage surges.
Compatibility and Accessories
The NV-202 is designed for use in point-to-point connections, with configuration via DIP switches. An external splitter is optionally available to enable simultaneous transmission of telephone signals and data over the same line. Compatibility with the ITU-T G.993.2 standard ensures interoperability with other VDSL2-compatible devices.
Mounting and Installation
The device features a metal housing with integrated wall mounting, enabling easy wall installation. Optional mounting on a DIN rail is possible, which is particularly advantageous in enclosures or server rooms. Power supply is via an external power adapter with 12 V DC and a current draw of 1 A, included in the delivery scope.
Advantages in Operation
The NV-202 offers a compact design with a robust metal housing, making it suitable for use in industrial or commercial environments. Simple configuration via DIP switches enables quick commissioning without additional software or network management tools. Support for surge protection increases device reliability in environments with unstable power supplies or high electromagnetic interference. The maximum bandwidth of 100 Mbps and range of up to 3 km make the device a powerful solution for data transmission over existing telephone lines.