The EDS-405A Series from Moxa features compact, industrial-grade 5-port managed Ethernet switches specifically designed for mission-critical automation and networking. These switches deliver ultra-fast network recovery (<20 ms with up to 250 switches) using Turbo Ring and Turbo Chain redundancy technologies, while also supporting standard RSTP and STP for conventional redundancy frameworks.

Each switch supports advanced features like IGMP Snooping, IEEE 802.1Q VLANs, port-based VLANs, and QoS, enabling precise control over traffic flows and multicast data. Configuration and management are simple, with access via web browser, CLI, Telnet, serial console, or Windows utility. PROFINET and EtherNet/IP models are factory-enabled for seamless integration into industrial protocols and PLC environments.

Reliability is further enhanced through built-in relay outputs that alert users of power losses or port link failures. With a durable IP30-rated metal housing and a wide operating temperature range (-40 to 75°C for T-models), the switches are ideal for harsh industrial environments.

Technical Details:

• Number of Ports: 5 x RJ45 (standard, EIP, PN, PTP models), 3 x RJ45 + 2 fiber optic ports (for MM/SS models)
• Supported Media: 10/100BaseT(X), 100BaseFX (SC/ST, multimode or single-mode depending on model)
• Auto speed negotiation, full/half duplex, Auto MDI/MDI-X
• Redundancy Protocols: Turbo Ring, Turbo Chain, RSTP, STP
• VLAN Support: IEEE 802.1Q, port-based, GVRP
• QoS: IEEE 802.1p, TOS/DiffServ
• Industrial Protocols: EtherNet/IP, Modbus TCP, PROFINET IO Device (model-dependent)
• Management Features: SNMP v1/v2c/v3, Telnet, TFTP, DHCP, LLDP, port mirroring, RMON, syslog
• Security: HTTPS, SSL, SSH, access control, port lock, broadcast storm protection
• Time Sync: NTP/SNTP for all models, IEEE 1588v2 (PTP models only)
• Power Input: 12/24/48 VDC (range: 9.6 to 60 VDC), dual redundant, with reverse polarity and overcurrent protection
• Enclosure: Metal, IP30 protection
• Dimensions: 53.6 x 135 x 105 mm
• Weight: approx. 650 g to 820 g depending on model
• Mounting: DIN-rail or optional wall mounting kit
• Operating Temperature: -10 to 60 °C (standard), -40 to 75 °C (T models)
• Humidity: 5–95% (non-condensing)
• Certifications: UL 508, UL 60950-1, EN 62368-1, FCC, EN 55032/35, ATEX, EN 50121-4, NEMA TS2, DNV
• MTBF: up to 1,547,941 hours (Telcordia standard)