Moxa EDR-810 Series – Industrial Secure Router with 8 FE + 2 GbE SFP, Built-in Firewall, VPN, NAT, and Switch
The Moxa EDR-810 Series is a compact, all-in-one industrial-grade device integrating a firewall, VPN gateway, NAT router, and Layer 2 switch with 8 Fast Ethernet ports and 2 Gigabit SFP slots. It is built for securing Ethernet-based control and monitoring systems in industries such as water treatment, oil and gas, and factory automation.
Security features include stateful firewall rules, IPsec VPN tunnels, and NAT to separate trusted network zones from external threats. With PacketGuard, the router can perform deep inspection of industrial protocols such as Modbus TCP, EtherNet/IP, EtherCAT, FOUNDATION Fieldbus, and PROFINET. Engineers benefit from the Quick Automation Profile to configure protocol filtering with just a few clicks.
Turbo Ring and RSTP ensure high network availability, while WAN Routing Quick Setting and SettingCheck make configuration intuitive and secure. The -T models are rated for -40 to 75 °C operation and meet cybersecurity standards such as IEC 62443, NERC CIP, and IEC 61162-460 for marine environments.
Technical Specifications:
Network Interfaces:
- 8 × 10/100BaseT(X) RJ45 ports
- 2 × 100/1000BaseX SFP slots
Security Features:
- Stateful firewall with zone control
- NAT for internal LAN protection
- IPsec VPN (client/server mode)
- Industrial protocol filtering via Quick Automation Profile
- Deep packet inspection with PacketGuard
- Intelligent firewall validation with SettingCheck
Networking Capabilities:
- WAN/LAN setup via 4-step wizard
- Network redundancy with Turbo Ring and RSTP
I/O Interfaces:
- 1 × Alarm contact: 1 A @ 24 VDC
- 1 × Reset button
- 1 × Digital input:
- High: +13 to +30 V
- Low: -30 to +3 V
- Max. input current: 8 mA
Environmental Limits:
- Operating temperature:
- Standard: 0 to 60 °C
- Wide-temp (-T model): -40 to 75 °C
Certifications:
- IEC 62443 (Industrial cybersecurity)
- NERC CIP (Energy sector compliance)
- IEC 61162-460 (Marine cybersecurity standard)