| General |
| Total height | 36,5 mm |
| PCB dimensions | 62x100 mm |
| Front panel material | 1.5 mm aluminium sheet |
| Side cover | ABS plastic |
| Surface treatment | anodized and matt etched or black (SW) |
| Slide rail spacing | 12/17/22 mm |
The Monacor housing, type AH-61 (33.0080), is a component for mounting printed circuits in compact electronic devices. It serves as mechanical protection and structural base for small electronic modules, particularly in applications requiring a stable and simultaneously easily adaptable housing construction. The housing is made of extruded profile, ensuring high mechanical stability and uniform wall thickness. The front plate is interchangeable and made of standard 1.5 mm aluminium sheet, protected with a protective film. The side cover is made of matte black ABS plastic, enabling a robust and visually uniform covering of the side surfaces. The housing surface is either anodized and matt etched or black (SW), providing a uniform, scratch- and abrasion-resistant coating.
Applications
This housing is suitable for use in small electronic devices where modular mounting of circuit boards is required. Typical application fields include small control units, sensor modules, power supply housings, or prototypes during development phase. The interchangeable front plate allows flexible adaptation to different control interfaces without replacing the entire housing. The insertion grooves in the profile enable mounting of circuit boards at various heights, allowing optimal positioning of the circuit within the housing.
Functions and Equipment in Detail
The housing features integrated insertion grooves designed for mounting printed circuits. The distances to the front plate are 12 mm, 17 mm, or 22 mm, enabling flexible positioning of the circuit board within the housing. The front plate is made of 1.5 mm aluminium sheet and can be replaced as needed. The protective film on the front plate protects the surface from scratches and contamination. The ABS plastic side cover is matte black and provides a closed, aesthetically pleasing covering of the side surfaces. The material surface is either anodized and matt etched or black (SW), ensuring high resistance to external influences.
Technology Explained Simply
The extruded profile offers high strength at low weight and allows precise shaping. The insertion grooves in the profile are designed to ensure secure and stable mounting of the circuit board. The distances of 12, 17, and 22 mm from the front plate allow adaptation to different circuit board types and mounting heights. The aluminium sheet front plate is robust and easy to process, enabling integration of individual control panels or displays. The ABS side cover is resistant to mechanical stress and provides a uniform surface. The anodized and matt etched or black surface protects the housing against corrosion and wear.
Compatibility and Accessories
The housing is designed for printed circuits that do not exceed dimensions of 62 mm (width) × 100 mm (length). The insertion grooves allow mounting of the circuit board at various heights, enabling optimal positioning within the housing. The front plate is interchangeable, allowing integration of different control panels or displays.
Mounting and Installation
Mounting is done by inserting the circuit board into the insertion grooves of the extruded profile. The circuit board is positioned at the desired height (12, 17, or 22 mm from the front plate). The ABS plastic side cover is attached to the side surfaces to ensure a closed covering. Mounting does not require special tools, but precise alignment of the circuit board and front plate is necessary to ensure secure and aesthetically pleasing installation.
Advantages in Operation
The housing provides a stable and compact solution for mounting small electronic modules. The interchangeable front plate allows flexible adaptation to different control interfaces. The integrated insertion grooves ensure secure mounting of the circuit board, minimizing mechanical stress. The materials are robust and resistant to external influences, ensuring a long service life of the housing. The uniform surface and matte black side cover contribute to a professional appearance of the device.