Housing for circuit breakers and load break switches, material polycarbonate, impact-resistant, protection class IP65, patented cover lock with integrated overpressure compensation, use as a single housing or in a distribution network, for distribution networks the characteristics of other equipment must be observed, metric pre-punched holes in all side walls, side walls without pre-punched holes, open at the bottom, side walls can be knocked out and aligned with other housings, mounting plate pre-drilled for switch and pre-drilled for one PE and N terminal each, mounting plate made of 3mm thick sheet steel, sealable cover locks, cover design: transparent smoke gray, pre-drilled, protection class IP65, with switch door coupling rotary handle NZM.-XTVD and extension shaft, fastening material for terminals, fastening bracket BL-CI, not in combination with remote drive NZM.-XR, plug-in device NZM.-XSV or withdrawable device NZM.-XAV, rated continuous current Iu=630 A, can be used for switches NZM3(-4), N3(-4), N(S)3(-4), can be used for terminals K50/1, K95/1N., K150/1N., K240/1N., K2X240/1N., Notes: Additional terminals for PE and N conductors K50/1, K95/1N..., K150/1N..., K240/1N..., K2X240/1N... for 4th and 5th pole must be ordered separately