Mitsubishi 238355

Mitsubishi FFR-HEL-H45K-E DC link choke 400 V

Industrial Material > Automation > Frequency converter, soft starter

Mitsubishi FFR-HEL-H45K-E DC link choke 400 V

Lieske Part No. 1331232
Mfg Part No 238355
EAN-Code
Manufacturer Mitsubishi
Here only 258,11 EUR
307,15 EUR incl. VAT

Further information for Mitsubishi FFR-HEL-H45K-E DC link choke 400 V

General
Inductance0,84 mH
Nominal current82 A
Operating voltage400 V
Nominal power45 kW
The Mitsubishi intermediate circuit choke type FFR-HEL-H45K-E is a specific component for frequency converters in the 400-volt range. It serves to stabilize the DC intermediate circuit in industrial drive systems and is particularly used in installations with a rated power of 45 kW. The choke is part of electrical drive technology and supports efficient and reliable energy transfer between the power grid and the converter by damping voltage spikes and current fluctuations.

Intermediate circuit choke is the technical term for an inductive component used in power electronics to smooth the current flow in the DC intermediate circuit of converters. The Mitsubishi FFR-HEL-H45K-E is a choke specifically designed for 400-volt converters. Its function is to reduce current ripple in the intermediate circuit, thereby extending the service life of converter components and improving electromagnetic compatibility (EMC). The choke is designed for a rated power of 45 kW, making it suitable for medium-sized industrial drives.

Frequency converters are central components in automation technology that adjust the speed of electric motors by frequency control. The intermediate circuit choke supports this process by minimizing electrical disturbances in the DC intermediate circuit. This is particularly important in systems operating with variable speed, as they experience high electrical loads and rapid switching operations. The choke ensures a more uniform current flow in the intermediate circuit, increasing the efficiency and stability of the entire drive system.

Inductance is a physical parameter describing a component’s ability to store magnetic flux changes and dampen current variations. The Mitsubishi FFR-HEL-H45K-E has an inductance of 0.84 mH. This value is designed for the intended application in the 400-volt range with a rated power of 45 kW and ensures sufficient damping of current fluctuations. An inductance that is too low could result in inadequate smoothing, while an inductance that is too high could impair the converter’s performance.

Rated current is the maximum current the component can handle continuously without causing thermal or electrical damage. The choke is designed for a rated current of 82 A, defining the maximum current load during operation. This value is critical for selecting the correct choke to ensure stable operation under the intended operating conditions. Thus, the choke is designed for drives that process up to 82 amperes in continuous operation.

Operating voltage refers to the voltage at which the component is intended to operate. The Mitsubishi FFR-HEL-H45K-E is designed for an operating voltage of 400 V, which corresponds to the standard for industrial three-phase drives. This voltage is typical for medium to large drive systems in manufacturing, packaging, or machine building industries. The choke is therefore designed for converters connected to a 400-V power network.

The choke is used in industrial environments where high electrical loads and variable operating conditions prevail. It is an integral part of drive technology and is installed in combination with frequency converters to ensure electrical stability and EMC compatibility. Installation typically takes place in the converter or drive enclosure, with electrical connections made to the corresponding terminals of the converter. The choke is not intended for direct use in networks or for applications outside frequency converter technology.

Compatibility is crucial for proper function. The Mitsubishi FFR-HEL-H45K-E is specifically designed for 400-V converters with a rated power of 45 kW. It is therefore designed for drives used in industrial automation technology. The choke is not a universal component but must be matched to the specific parameters of the converter to ensure desired performance and stability. Incompatibility could lead to malfunctions or damage to the converter.

Operation in industrial environments requires robust and reliable components. The intermediate circuit choke is designed for use in industrial drive systems, where high electrical loads, temperature fluctuations, and mechanical vibrations occur. The choke is thus designed for continuous operation under these conditions.

The choke is described as a standalone component, without reference to supplementary products or systems.

The choke is a specific component used in automation technology for frequency converters. Its function is to stabilize the DC intermediate circuit, thereby enhancing the electrical quality and reliability of the drive system. Technical specifications such as inductance, rated current, and operating voltage are tailored to applications with 45-kW drives.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1331232
qrcode für Mitsubishi FFR-HEL-H45K-E DC link choke 400 V