Mitsubishi 209761

Mitsubishi FFR-DT-330A-SS1 du/dt filter 400 V

Industrial Material > Engines and accessories

Mitsubishi FFR-DT-330A-SS1 du/dt filter 400 V

Lieske Part No. 665908
Mfg Part No 209761
EAN-Code
Manufacturer Mitsubishi
Here only 2.764,88 EUR
3.290,21 EUR incl. VAT

Further information for Mitsubishi FFR-DT-330A-SS1 du/dt filter 400 V

General
Operating voltage400 V
Maximum operating current330 A
Filter frequency2-16 kHz
The Mitsubishi FFR-DT-330A-SS1 is a du/dt filter for 400-volt inverters, designed for maximum operating currents up to 330 amperes. It serves to reduce voltage overshoots and electrical disturbances caused by the rapid switching operations in frequency inverters. These filters are commonly used in industrial installations where motors are driven via frequency inverters, in order to extend the service life of drive motors and improve power quality. The filter is specifically designed for applications where the inverter switching frequency ranges from 2 to 16 kHz.

Applications

The FFR-DT-330A-SS1 is used in industrial drive systems, particularly in installations with 400-volt supply voltage, where frequency inverters are employed for speed control of electric motors. Typical applications include conveyor systems, pumps, fans, presses, and other machinery requiring precise speed control. The use of a du/dt filter protects the windings of drive motors from harmful voltage spikes generated by the high switching speeds of inverters. This extends motor life and reduces the likelihood of insulation failure.

Functions and Features in Detail

The filter operates as a passive component block installed between the frequency inverter and the drive motor. It serves to dampen the rate of voltage change (du/dt) occurring during rapid switching operations in the inverter. The filter frequency (FT) ranges from 2 to 16 kHz, making it suitable for inverters operating within this switching frequency range. The maximum current rating is 330 amperes, making it suitable for medium to large industrial drives. The filter technology reduces voltage spikes occurring at the motor windings, thereby minimizing mechanical and electrical stress on the insulation.

Technology Explained Simply

A du/dt filter consists of a combination of inductances and capacitances designed to dampen the high voltage rises generated by switching operations in the inverter. The term “du/dt” describes the change in voltage (u) over time (t), i.e., the rate at which voltage changes. High du/dt values lead to high electric field strengths in motor windings, which can cause insulation failure. The filter reduces this rate of change, thereby mitigating voltage spikes. The filter frequency of 2 to 16 kHz indicates that the filter is designed for inverters operating within this frequency range.

Compatibility and Accessories

The FFR-DT-330A-SS1 is specifically designed for 400-volt inverters and is installed directly between the inverter and the motor. It is designed for inverters operating with a switching frequency between 2 and 16 kHz. Compatibility is limited to these voltage and frequency ranges.

Installation and Mounting

Installation typically occurs in the connection between the frequency inverter and the drive motor. The physical dimensions are 240 mm (width) × 220 mm (height) × 240 mm (depth), which must be considered during mounting space planning. Mounting is typically done at a suitable, well-ventilated location to ensure adequate cooling. Electrical connections are made via designated terminals rated for the maximum current load of 330 A.

Operational Advantages

Using the FFR-DT-330A-SS1 leads to a significant reduction in voltage spikes at the motor, extending the life of motor windings. This reduces maintenance costs and downtime in production. Additionally, power quality is improved, as electromagnetic disturbances generated by the inverters are reduced. The filter frequency of 2 to 16 kHz enables effective damping at typical inverter frequencies without impairing the performance of the drive system. The robust construction and specific design for 400-volt systems make the filter a reliable component in industrial drive systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/665908
qrcode für Mitsubishi FFR-DT-330A-SS1 du/dt filter 400 V