The Small Form Factor Pluggable (SFP+) is a state-of-the-art transceiver module designed for use in modern network environments. Its compact design makes it smaller than all other available form factors, enabling maximum port density per line card. Supporting bandwidths of up to 11.1 GBit/s, the SFP+ is optimized for demanding network applications, including 10 Gigabit Ethernet, 8 Gigabit Fibre Channel, and STM-64.

Thanks to its hot-swap functionality, SFP+ modules can be installed or replaced during operation without disrupting network performance. The modules are compatible with various cable types, including multimode, single-mode, and simplex fibers, offering high flexibility in network configuration. Standards such as the Multi Source Agreement (MSA) and SFF-8472 ensure standardized construction and optional Digital Diagnostic Monitoring (DDM), enabling precise monitoring of the connection.

Technical Specifications:

Types and Media:

• Supports multimode and single-mode fibers
• LC-duplex connector for reliable optical connections
• Digital Diagnostic Monitoring (DDM) to monitor parameters such as signal strength, temperature, and voltage
• Hot-swap capability for easy installation or replacement during operation

Technical Details:

• Bandwidth: 8.5 GBit/s to 11.1 GBit/s
• Range:
- Multimode: 220 m to 300 m
- Single-mode: 10 km to 80 km

• Wavelengths:
- Multimode: TX/RX at 850 nm or 1310 nm
- Single-mode: TX/RX at 1310 nm or 1550 nm

• Operating Temperature:
- Standard models: 0°C to +70°C
- Extended temperature models: -40°C to +85°C

• Power Budget: Between 3.5 dB and 23 dB (depending on model)
• Protocols: 10 Gigabit Ethernet, STM-64
• Laser Types:
- Multimode: VCSEL or FP
- Single-mode: DFB or EML


Safety Information:

Fiber-optic components emit visible and invisible light that can cause irreversible eye damage. Please observe:

• Never look directly into optical outputs (risk of blinding).
• Cover unused optical ports with protective caps.
• Activate connections only after all connections are complete.

The active laser components comply with Laser Class 1 standards.

Order Information:

Multimode Models:

• MS100700D: SFP+ 10G Transceiver SR, Multimode 850 nm, DDM, LC, range 300 m, operating temperature 0°C to +70°C
• MS100700DX: SFP+ 10G Transceiver SR, Multimode 850 nm, DDM, LC, extended temperature range (-40°C to +85°C)
• MS100701D: SFP+ 10G Transceiver LRM, Multimode 1310 nm, DDM, LC, range 220 m

Single-Mode Models:

• MS100702D: SFP+ 10G Transceiver LR, Single-mode 1310 nm, DDM, LC, range 10 km, operating temperature 0°C to +70°C
• MS100702DX: SFP+ 10G Transceiver LR, Single-mode 1310 nm, DDM, LC, extended temperature range (-40°C to +85°C)
• MS100704D: SFP+ 10G Transceiver ER, Single-mode 1550 nm, DDM, LC, range 40 km
• MS100706D: SFP+ 10G Transceiver ZR, Single-mode 1550 nm, DDM, LC, range 80 km

SFP+ modules provide a high-performance, scalable, and reliable solution for modern networks, ensuring maximum flexibility and efficiency.