The Small Form Factor Pluggable (SFP+) is an innovative, next-generation interchangeable transceiver module designed for use in modern networking environments. Its compact design makes it smaller than all other currently available form factors, allowing the highest port density per line card.

SFP+ transceivers are fully compatible with 10G network slots and provide a maximum bandwidth of up to 11.1 GBit/s. This enables flexible configurations for various network requirements, including support for 10 Gigabit Ethernet, 8 Gigabit Fibre Channel, and STM-64. The hot-swap functionality allows modules to be replaced or installed during operation without disrupting network traffic.

Transceivers can be chosen according to the cable medium – multimode, single-mode, or simplex. Standards such as the Multi Source Agreement (MSA) and SFF-8472 ensure standardized construction and optional Digital Diagnostic Monitoring (DDM) for precise connection monitoring.

Technical Specifications:

Types and Media:

• Supports multimode and single-mode fibers
• LC-duplex connector for reliable connections
• Digital Diagnostic Monitoring (DDM) to monitor signal strength, temperature, and other parameters
• Hot-swap capability for easy installation or replacement

Technical Details:

• Bandwidth: 8.5 GBit/s to 11.1 GBit/s
• Range:
- Multimode: 220 m to 300 m
- Single-mode: 10 km to 80 km

• Wavelengths:
- Multimode: TX/RX at 850 nm or 1310 nm
- Single-mode: TX/RX at 1310 nm or 1550 nm

• Operating Temperature Range:
- Standard models: 0°C to +70°C
- Extended temperature models: -40°C to +85°C

• Power Budget: Between 3.5 dB and 23 dB (depending on model)
• Protocols: 10 Gigabit Ethernet, STM-64
• Laser Types:
- Multimode: VCSEL or FP
- Single-mode: DFB or EML


Safety Information:

Fiber-optic components emit visible and invisible light that can cause irreversible eye damage. Please observe the following:

• Never look directly into optical outputs (risk of blinding).
• Cover unused optical ports with protective caps.
• Activate connections only after all ports are securely connected.

The active laser components comply with Laser Class 1 standards.

Order Information:

Multimode Models:

• MS100700D: SFP+ 10G Transceiver SR, Multimode 850 nm, DDM, LC, range 300 m, operating temperature 0°C to +70°C
• MS100700DX: With extended temperature range (-40°C to +85°C)
• MS100701D: SFP+ 10G Transceiver LRM, Multimode 1310 nm, DDM, LC, range 220 m

Single-Mode Models:

• MS100702D: SFP+ 10G Transceiver LR, Single-mode 1310 nm, DDM, LC, range 10 km
• MS100702DX: With extended temperature range (-40°C to +85°C)
• MS100704D: SFP+ 10G Transceiver ER, Single-mode 1550 nm, DDM, LC, range 40 km
• MS100706D: SFP+ 10G Transceiver ZR, Single-mode 1550 nm, DDM, LC, range 80 km

SFP+ modules are ideal for scalable, high-performance networks that demand maximum reliability and flexibility.