The Small Form Factor Pluggable (SFP+) is a state-of-the-art, next-generation interchangeable transceiver module. It is used in appropriately equipped active network components and features a compact design that is smaller than all currently available form factors. This compact size allows for high port density per line card, ensuring maximum efficiency in network infrastructures. Many modern network devices with 10G interfaces are already optimized for SFP+ modules, which provide maximum flexibility in configuration thanks to their identical form factor.

With hot-swap capability, SFP+ modules can be installed or replaced during operation without interrupting network functionality. The modules are available for various cable types, such as multimode, single-mode, and simplex, and cover a wide range of distances. With a bandwidth of up to 11.1 GBit/s, SFP+ modules support 10 Gigabit Ethernet, 8 Gigabit Fibre Channel, and STM-64, making them ideal for demanding network applications.

The Multi Source Agreement (MSA) and SFF-8472 ensure standardized construction and optional features like Digital Diagnostic Monitoring (DDM), which allows users to monitor important connection parameters such as signal strength and temperature.

Technical Specifications:

Types and Media:

• Support for multimode and single-mode fibers
• LC-duplex connector for stable optical connections
• Digital Diagnostic Monitoring (DDM) for precise connection monitoring
• Hot-swap capability for easy installation or replacement

Technical Details:

• Bandwidth: 8.5 GBit/s to 11.1 GBit/s
• Range:
- Multimode: 220 m to 300 m
- Single-mode: 10 km to 80 km

• Wavelengths:
- Multimode: TX/RX at 850 nm or 1310 nm
- Single-mode: TX/RX at 1310 nm or 1550 nm

• Operating Temperature Range:
- Standard models: 0°C to +70°C
- Extended models: -40°C to +85°C

• Power Budget: Between 3.5 dB and 23 dB (depending on the model)
• Protocols: 10 Gigabit Ethernet, STM-64
• Laser Types:
- Multimode: VCSEL or FP
- Single-mode: DFB or EML


Safety Information:

Fiber-optic components emit visible and invisible light that can cause irreversible eye damage. To prevent injuries:

• Never look directly into optical outputs (risk of blinding).
• Cover unused ports with protective caps.
• Activate the connection only after all connections are completed.

The active laser components comply with Laser Class 1 standards.

Order Information:

Multimode Models:

• MS100700D: SFP+ 10G Transceiver SR, Multimode 850 nm, DDM, LC, range 300 m, operating temperature 0°C to +70°C
• MS100700DX: With extended temperature range (-40°C to +85°C)
• MS100701D: SFP+ 10G Transceiver LRM, Multimode 1310 nm, DDM, LC, range 220 m

Single-Mode Models:

• MS100702D: SFP+ 10G Transceiver LR, Single-mode 1310 nm, DDM, LC, range 10 km
• MS100702DX: With extended temperature range (-40°C to +85°C)
• MS100704D: SFP+ 10G Transceiver ER, Single-mode 1550 nm, DDM, LC, range 40 km
• MS100706D: SFP+ 10G Transceiver ZR, Single-mode 1550 nm, DDM, LC, range 80 km

SFP+ modules are the ideal solution for high-performance, scalable networks that require reliability and flexibility.