The Small Form Factor Pluggable (SFP) transceiver module is a state-of-the-art, replaceable module specifically designed for network infrastructures. With its compact design, it provides the highest density per line card and is compatible with most 1G-enabled networking devices. The hot-swap functionality allows for installation or replacement of the modules during operation, minimizing downtime.

Low-Power SFP models (LPC SFP) deliver the same high transmission performance as standard modules while requiring only 70% of the electrical energy. This energy efficiency reduces power consumption and heat generation, enhancing the overall efficiency of the network infrastructure. Compliance with MSA and SFF-8472 standards ensures standardized construction and support for digital diagnostic functions (DDM).

The versatile SFPs are optimized for multimode, single-mode, and simplex applications and support speeds of up to 1.25 Gbps. They are ideal for Gigabit Ethernet and Gigabit Fibre Channel, meeting the demands of modern network infrastructures.

Technical Specifications:

Transceiver Types:

• MS100200DX-V2
• MS100210DX-V2
• MS100221DXA-V2
• MS100221DXB-V2

Connector:

• LC plug (duplex or simplex, depending on the model)

Supported Cable Media:

• Multimode
• Singlemode
• Singlemode simplex

Range:

• 300 m to 20 km (depending on the model)

Power Consumption:

• Maximum 0.6 W

Operating Temperature:

• -40 °C to +85 °C

Bandwidth:

• 1.063 Gbps to 1.25 Gbps

Wavelength Range:

• TX: 830–1570 nm (depending on the model)
• RX: 830–1330 nm (depending on the model)

Power Budget:

• 7.5 dB to 15 dB (depending on the model)

Laser Type:

• VCSEL (850 nm)
• FP Laser (1310 nm)
• DFB Laser (1550 nm)

Protocol Support:

• Gigabit Ethernet
• Gigabit Fibre Channel

Transmit (Power):

• MIN/MAX: -9.5 / -3 dBm

Receiver (Sensitivity):

• MIN/MAX (overload): -17 / -3 dBm to -24 / -3 dBm (depending on the model)

Extinction Ratio:

• 6 dB

Features:

• Hot-swappable
• Energy-efficient Low-Power design
• Digital diagnostic interface (DDM)
• Compliant with MSA and SFF-8472 standards
• Laser Class 1 safety certification

Safety Notes:

Never look directly into optical ports, as visible and invisible laser light can cause eye damage.

Always cover unused ports with protective caps.

Ensure all connections are properly established before activating the transmission line.

Ordering Information:

MS100200DX-V2: LPC SFP GbE Transceiver 1.25G SX, Multimode, 850nm, DDM, LC, -40..+85°C

MS100210DX-V2: LPC SFP GbE Transceiver 1.25G LX, SingleMode, 1310nm, 10km, DDM, LC, -40..+85°C

MS100221DXA-V2: LPC SFP GbE WDM Transceiver 1.25G BX, SingleMode TX1310nm / RX1550nm, 20km, DDM, LC simplex, -40..+85°C

MS100221DXB-V2: LPC SFP GbE WDM Transceiver 1.25G BX, SingleMode TX1550nm / RX1310nm, 20km, DDM, LC simplex, -40..+85°C