The Small Form Factor Pluggable (SFP) is a modern, interchangeable transceiver module specifically designed for networking applications. Thanks to its compact form factor, it enables maximum port density per line card. SFP modules are compatible with nearly all networking devices featuring 1G interfaces, providing maximum flexibility for network configurations.

With hot-swap functionality, SFP modules can be replaced during operation without disrupting the network. The Low-Power models (LPC SFP) deliver the same performance as standard modules but require only 70% of the energy due to optimized circuitry. This reduces power consumption and heat generation, offering an energy-efficient and sustainable solution for networking infrastructures.

Compliance with MSA and SFF-8472 standards ensures high compatibility, standardized designs, and support for digital diagnostic functions.

Technical Specifications:

Transceiver Types:

• MS100200DX-V2
• MS100210DX-V2
• MS100221DXA-V2
• MS100221DXB-V2

Connector:

• LC plug (duplex or simplex, depending on the model)

Supported Cable Media:

• Multimode
• Singlemode
• Singlemode simplex

Range:

• 300 m to 20 km (model-dependent)

Power Consumption:

• Maximum 0.6 W

Operating Temperature:

• -40 °C to +85 °C

Bandwidth:

• 1.063 Gbps to 1.25 Gbps

Wavelength Range:

• TX: 830–1570 nm (model-dependent)
• RX: 830–1330 nm (model-dependent)

Power Budget:

• 7.5 dB to 15 dB (depending on the model)

Laser Type:

• VCSEL (850 nm)
• FP Laser (1310 nm)
• DFB Laser (1550 nm)

Protocol Support:

• Gigabit Ethernet
• Gigabit Fibre Channel

Transmit (Power):

• MIN/MAX: -9.5 / -3 dBm

Receiver (Sensitivity):

• MIN/MAX (overload): -17 / -3 dBm to -24 / -3 dBm (model-dependent)

Extinction Ratio:

• 6 dB

Features:

• Hot-swappable
• Energy-efficient Low-Power models
• Digital diagnostic interface (DDM)
• Compliant with MSA and SFF-8472 standards
• Laser Class 1 safety certification

Safety Notes:

Never look directly into optical ports, as visible and invisible laser light can cause eye damage.

Always cover unused ports with protective caps.

Ensure all connections are completed before activating the transmission line.

Ordering Information:

MS100200DX-V2: LPC SFP GbE Transceiver 1.25G SX, Multimode, 850nm, DDM, LC, -40..+85°C

MS100210DX-V2: LPC SFP GbE Transceiver 1.25G LX, SingleMode, 1310nm, 10km, DDM, LC, -40..+85°C

MS100221DXA-V2: LPC SFP GbE WDM Transceiver 1.25G BX, SingleMode TX1310nm / RX1550nm, 20km, DDM, LC simplex, -40..+85°C

MS100221DXB-V2: LPC SFP GbE WDM Transceiver 1.25G BX, SingleMode TX1550nm / RX1310nm, 20km, DDM, LC simplex, -40..+85°C