| General |
| Data rate | 155 Mbit/s |
| Transmitter wavelength | 1310 nm |
| Receiver wavelength | 1550 nm |
| Transmission range | 15 km |
| Operation temperature | -40..+85 °C |
| Plug connection | LC simplex |
| Fibre type | Single mode |
| Technology | WDM |
| Function | DDM |
The MICROSENS SFP FE WDM transceiver MS100191DXA-V3 is a modular network connection unit for use in Ethernet networks with a data rate of 155 Mbit/s. It serves as a bidirectional transmission module for singlemode fibres and enables data transmission over distances up to 15 km. The module is specifically designed for WDM systems (Wavelength Division Multiplexing), where multiple data streams are transmitted over a single fibre by using different wavelengths. The transceiver unit transmits at a wavelength of 1310 nm (TX) and receives at 1550 nm (RX), enabling bidirectional communication over a single fibre pair.
Applications
The transceiver is suitable for use in industrial and telecommunication networks, particularly in environments requiring high temperature resistance. It is designed for operating temperatures from -40 °C to +85 °C, making it suitable for outdoor use or in industrial facilities with extreme environmental conditions. Use in WDM systems enables efficient utilisation of fibre infrastructure, especially in backbone networks or for connecting sites over long distances.
Functions and Equipment in Detail
The module features DDM functions (Digital Diagnostic Monitoring), enabling real-time monitoring of operating parameters such as temperature, voltage, optical power, and transceiver status. These diagnostic functions support network administration in fault detection and resolution. The connection is made via an LC simplex connector, optimised for singlemode fibres and ensuring a secure, mechanically stable connection. The unit is compact and designed for use in standard SFP slots of switches, routers, or other network devices.
Technology Explained Simply
The transceiver uses WDM technology, where multiple signals are transmitted over a single fibre by using different light wavelengths. In this case, the module transmits at 1310 nm and receives at 1550 nm, enabling bidirectional communication over a single fibre pair. This technology reduces the number of fibres required and optimises capacity utilisation. The singlemode fibre ensures high bandwidth and low attenuation, enabling transmission over 15 km. The DDM functions allow continuous monitoring of operating parameters, increasing network security.
Compatibility and Accessories
The transceiver is designed for use in standard SFP slots and is compatible with devices that support SFP modules. The use of LC simplex connectors requires corresponding fibre infrastructure. For integration into existing networks, a fibre link with singlemode optics and LC connectors is required.
Installation and Mounting
Installation is performed by simply inserting the module into an SFP slot of a network device. The mechanical connection is made via the LC simplex connector, which is directly connected to the fibre cable. The unit requires no additional tools or settings. The operating temperature range of -40 °C to +85 °C requires no special cooling or heating measures, as long as the ambient temperature remains within this range.
Operational Advantages
The transceiver provides reliable, bidirectional data transmission over 15 km with high bandwidth. The DDM functions enable proactive network monitoring and reduce maintenance time. The high temperature resistance makes the module suitable for demanding operating conditions. The use of WDM technology optimises fibre infrastructure and reduces costs for additional fibres. The LC simplex connection ensures a stable and mechanically robust connection.