Metz Connect MNF881A315-0001, EAN: 4250184151166

Metz Connect MNF881A315-0001 patch cable Cat6A M12 connector X-coded IP67

Cables > Data lines > Cat6 Patch Cable

Metz Connect MNF881A315-0001 patch cable Cat6A M12 connector X-coded IP67

Lieske Part No. 345193
Mfg Part No MNF881A315-0001
EAN-Code 4250184151166
Manufacturer Metz Connect
Here only 32,27 EUR
38,40 EUR incl. VAT

Further information for Metz Connect MNF881A315-0001 patch cable Cat6A M12 connector X-coded IP67

General
Connector typeM12
Cable categoryCat.6A
EncodingX-coded
Cable preparation capabilityfield configurable
Housing materialZinc die-cast
Connection type8-conductor cable connection
AWG22
Connection range AWG26/1 - 22/1, 26/7 - 22/7
Conductor diameter solid copper wire0,4 - 0,64 mm
Conductor diameter Cu-stranded wire0,48 - 0,76 mm
Core diameterup to 1.6 mm
Cable jacket diameter6,0 - 9,7 mm
Components2
Application rangeRail industry
The Metz Connect MNF881A315-0001 is a field-terminable M12 connector of category Cat.6A, X-coded, for use in industrial networking applications. It is specifically designed for direct connection to 8-pair data cables and enables quick and tool-free on-site installation. The connector is based on the standard IEC PAS 61076-2-109 and is designed for cables with AWG 22, with connections possible from AWG 26/1 to AWG 22/1 and AWG 26/7 to AWG 22/7. The construction consisting of only two parts significantly simplifies installation and reduces assembly effort. The housing is made of industrial-grade zinc die-cast, ensuring high mechanical stability and durability. According to the datasheet, the connector is suitable for applications in the railway industry.

Applications

The connector is designed for use in demanding industrial environments, particularly in the railway industry, where high mechanical loads, vibrations, and environmental influences occur. The X-coding enables unambiguous assignment to specific connection points and prevents incorrect connections. Due to its robust design and high degree of protection, it is also suitable for outdoor use, where it is protected against dust and water.

Functions and Equipment in Detail

The MNF881A315-0001 is designed for connecting cables with a conductor diameter of 0.4 to 0.64 mm for solid copper wire and 0.48 to 0.76 mm for stranded copper wire. The maximum conductor diameter is 1.6 mm, and the cable jacket can have a diameter of 6.0 to 9.7 mm. Simple termination is performed without special tools, making on-site installation particularly efficient. The use of only two components reduces the risk of errors and speeds up the installation process.

Technology Explained Simply

The connector enables a direct connection between data cables and an M12 plug, with the X-coding ensuring unambiguous assignment. The Cat.6A classification guarantees high data transfer rates and minimal signal interference, which is important for critical industrial networks. The zinc die-cast housing provides mechanical stability and protection against external influences. Termination is achieved by simply inserting the cable and locking the two parts, requiring no additional tools.

Compatibility and Accessories

The connector is designed for cables with AWG 22 and can be connected to cables ranging from AWG 26/1 to AWG 22/1 and AWG 26/7 to AWG 22/7. It is part of a system suitable for use in the railway industry. As suitable accessories, the KAPRi plus cable and installation tester (article number 130670-E) is offered, which can be used to check the connection and signal quality.

Installation and Mounting

Installation is tool-free, achieved by simply inserting the cable into the connector and locking the two components. The design is such that no additional tools or special skills are required. Installation can be carried out directly on site, increasing flexibility and efficiency during commissioning.

Operational Advantages

The connector offers high mechanical robustness and is designed for use in demanding environments. The tool-free installation reduces assembly time and minimizes errors. The X-coding prevents incorrect connections, and the Cat.6A classification ensures reliable data transmission. Suitability for the railway industry demonstrates reliability under extreme conditions.

Degree of Protection

The connector is designed for use in environments with high mechanical loads and environmental influences. The zinc die-cast housing provides a high degree of protection required for industrial applications.

Cable Types and Connection Options

The connector is designed for 8-pair data cables and can be connected to cables with a conductor diameter of 0.4 to 0.64 mm (solid copper wire) and 0.48 to 0.76 mm (stranded copper wire). The maximum conductor diameter is 1.6 mm, and the cable jacket can have a diameter of 6.0 to 9.7 mm. Connection options include AWG 26/1 to AWG 22/1 and AWG 26/7 to AWG 22/7.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/345193
qrcode für Metz Connect MNF881A315-0001 patch cable Cat6A M12 connector X-coded IP67