Metz Connect 151J1JOJO20E, EAN: 4250184148067

Metz Connect 151J1JOJO20E Patch Cable LC-D/LC-D OM3 2m

Cables > Data lines > Cat6 Patch Cable

Metz Connect 151J1JOJO20E Patch Cable LC-D/LC-D OM3 2m

Lieske Part No. 977821
Mfg Part No 151J1JOJO20E
EAN-Code 4250184148067
Manufacturer Metz Connect
Here only 16,07 EUR
19,13 EUR incl. VAT

Further information for Metz Connect 151J1JOJO20E Patch Cable LC-D/LC-D OM3 2m

General
Fibre typeMulti mode
Fibre core50 µm
Fiber jacket125 µm
Fibre standardOM3
Fiber qualitylaser-optimised
Fibre classIEC 60793-2-10 Type A1a.2
Cable typeDuplex
Cable constructionZipcord (figure 8)
Tension reliefAramid
Material outer sheathHalogen-free, low smoke emission
Sheath typeLSHF-FR
Outer diameter2,0 x 4,2 mm
Test status100 % tested
ColourAqua
Flame retardancyYes
The Metz Connect patch cable 151J1JOJO20E is a multimode data cable of category OM3, designed for use in modern network infrastructures with high bandwidth and short transmission distances. It connects optical devices over a distance of 2 metres and is equipped with LC duplex connectors at both ends. The cable is specifically designed for use in data centres, server rooms, and other environments where reliable, high-speed data transmission via fibre optic is required.

Applications
This patch cable is intended for use in fibre optic networks in the multimode range, particularly in applications requiring high data rates, such as 10 Gigabit Ethernet. The OM3 specification enables a maximum reach of up to 300 metres at 10 Gbit/s. It is suitable for use in server and switch connections, where a stable and fast connection is necessary. The use in environments with high requirements for safety and fire prevention is supported by the halogen-free jacket material.

Functions and Equipment in Detail
The cable consists of two full fibres with a core diameter of 50 µm and a cladding diameter of 125 µm, in accordance with the standard IEC 60793-2-10 Type A1a.2. It is a laser-optimised multimode fibre designed for efficient light transmission at wavelengths of 850 nm. The bend-insensitive construction minimises the risk of signal loss due to bending, which is particularly advantageous during installation in confined spaces or with frequent movements. Tensile relief is provided by aramid fibres, ensuring mechanical stability and protecting the cable from tensile stress.

Technology Explained Simply
The designation OM3 stands for multimode optics of category 3, specifically optimised for laser light transmission. The fibre has a core of 50 µm, enabling high light guidance. The jacket material is halogen-free (LSHF-FR) and exhibits low smoke emission, making it particularly suitable for use in enclosed spaces such as server rooms. The flame-retardant property increases safety in the event of fire. The cable is designed as a zipcord (figure 8), making it easy to handle and install. The outer diameter is 2.0 x 4.2 mm, enabling a compact design.

Compatibility and Accessories
The patch cable is designed for use with LC duplex connectors and can be used in systems that support this connector type. It is compatible with other OM3 cables and devices that meet the standard IEC 60793-2-10 Type A1a.2. As accessories, LWL cleaning kits with monitor and fibre optic connector cleaners are available, recommended for maintenance and cleaning of optical connectors to avoid signal loss due to contamination. Using a cleaning kit ensures hygienic and efficient care of the connector interfaces.

Installation and Mounting
Installation is carried out by simply plugging the LC connectors into the corresponding device ports. Tensile relief provided by aramid fibres protects the cable from mechanical stress, especially during installation and connection. The bend-insensitive construction allows flexible placement without risk of signal interference. The cables are 100 % tested, ensuring high quality and reliability. Using a cable configurator allows adaptation to specific requirements, such as different lengths or connector types.

Advantages in Operation
The cable offers high transmission rates over short distances and is suitable for use in critical IT environments. The halogen-free and flame-retardant design increases safety in the event of fire. The bend-insensitive fibre and tensile relief ensure long service life and low maintenance requirements. The use of LC connectors enables a compact and secure connection that integrates well into dense patch panels. The Aqua colour identifies the cable as an OM3 cable, enabling quick identification within the network.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/977821
qrcode für Metz Connect 151J1JOJO20E Patch Cable LC-D/LC-D OM3 2m