Metz Connect 150Q1CO0020E, EAN: 4250184149743

Metz Connect 150Q1CO0020E Pigtail SC-UPC OS2

Networks > Fiber and Components

Metz Connect 150Q1CO0020E Pigtail SC-UPC OS2

Lieske Part No. 144247
Mfg Part No 150Q1CO0020E
EAN-Code 4250184149743
Manufacturer Metz Connect
Here only 42,77 EUR
50,89 EUR incl. VAT

Further information for Metz Connect 150Q1CO0020E Pigtail SC-UPC OS2

General
ConnectorSC
Fibre typeSingle mode
Fibre standardOS2
Core diameter9 µm
Sheath diameter125 µm
Bend insensitivityaccording to IEC 60793-2-50 Type B6_a
CompatibilityG.657.A1 compatible with G.652.D
Cable typeSemi tight
Cable diameter0,9 mm
Colour sequenceRed, green, blue, yellow, white, grey, brown, violet, turquoise, black, orange, pink
Colour codingaccording to IEC 60304
CoatingSecondary and primary coating same colour
Connector mountingsingle-sided mounted
TestInsertion loss and return loss tested to 100 %
The article 150Q1CO0020E from Metz Connect is an SC-pigtail for singlemode fibre applications in the field of optical data transmission. It is a cable with a single-sided mounted SC connector, specifically designed for use in networks with high requirements for signal quality and reliability. The product is suitable for use in telecommunications, data networks, and industrial installations where a stable and long-term reliable fibre cable connection is required.

Applications

The SC-pigtail is typically used as an interface cable between a fibre cable and an active network device, such as a switch, router, or transceiver. It is particularly suitable for applications where a direct connection between a fibre cable and a device with an SC connector is required. Use in telecommunications, carrier networks, or industrial automation is common, as fibre provides the necessary bandwidth and reach. The bend-insensitive fibre also allows for flexible installation, even in confined spaces or under frequent bending stress.

Functions and Equipment in Detail

The product features an SC connector manufactured according to IEC 61754-4. This connector is designed for a secure and precise connection in the network. The fibre itself is a singlemode fibre of type OS2 with a core diameter of 9 µm and a cladding diameter of 125 µm (E9/125 µm). The fibre is bend-insensitive according to IEC 60793-2-50 Type B6_a and compatible with G.657.A1, enabling high flexibility during installation without impairing optical properties. Compatibility with G.652.D ensures broad applicability in existing infrastructures.

Technology Explained Simply

The bend-insensitive fibre allows for smaller bending radii without significant signal loss, which is advantageous during installation in tight cable ducts or under frequent bending. The fibre is embedded in a compact cable with a diameter of 0.9 mm, enabling compact and flexible handling. The pigtail length is 2.0 metres, sufficient for use in standard rack installations. The colour coding in the set follows IEC 60304 and includes the colours red, green, blue, yellow, white, grey, brown, violet, turquoise, black, orange, and pink. This colour coding facilitates identification and management of cables in the network. The secondary and primary coating are colour-matched, supporting visual differentiation and assignment.

Compatibility and Accessories

The SC-pigtail is compatible with devices supporting an SC connector, particularly in telecommunications and data networks. Suitable accessories available in the range include crimp splice protection in various pack sizes (150 pieces or 12 pieces) from OpDAT. These accessories serve mechanical stabilisation and protection of the splice during installation.

Installation and Mounting

Installation is performed by directly connecting the SC connector to the corresponding port on the device. The pigtail is single-sided mounted, leaving the other side open to connect to a fibre cable. The fibre is 100 % tested, with insertion loss and return loss documented. A test report is included, making quality assurance traceable. Installation requires no additional tools, provided the connection interface on the device is already present.

Operational Advantages

Using this pigtail ensures high signal quality and reliability throughout its lifetime. The bend-insensitive fibre reduces the risk of breaks or signal loss during bending. Colour coding according to IEC 60304 simplifies network management and maintenance. The 100 % testing of optical parameters ensures predictable performance in operation. The combination of compact design and high flexibility makes the product a practical solution for various application scenarios.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/144247
qrcode für Metz Connect 150Q1CO0020E Pigtail SC-UPC OS2