Metz Connect 150M1JO0020E, EAN: 4250184116318

Metz Connect 150M1JO0020E Pigtail LC-PC OM3

Networks > Fiber and Components

Metz Connect 150M1JO0020E Pigtail LC-PC OM3

Lieske Part No. 167783
Mfg Part No 150M1JO0020E
EAN-Code 4250184116318
Manufacturer Metz Connect
Here only 43,68 EUR
51,98 EUR incl. VAT

Further information for Metz Connect 150M1JO0020E Pigtail LC-PC OM3

General
ConnectorLC
Connector typeLC-PC
Fibre typemultimode fibre
Fibre classOM3
Fibre geometryG50/125 µm
Bend insensitivityaccording to IEC 60793-2-10 Type A1a.2
Cable typeSemi tight
Cable diameter0,9 mm
Cable length2,0 m
Colour sequenceRed, green, blue, yellow, white, grey, brown, violet, turquoise, black, orange, pink
CoatingSecondary and primary coating same colour
Plug connectionsingle-sided mounted
Test certificationInsertion loss and return loss tested to 100 %
The article 150M1JO0020E from Metz Connect is a pigtail with LC connector, specifically designed for use in multimode fibre networks of category OM3. It is a fibre cable with a length of 2.0 metres, terminated on one side with an LC connector according to IEC 61754-20. The fibre itself conforms to the G50/125 µm standard and is classified as IEC 60793-2-10 Type A1a.2 bend-insensitive, ensuring high mechanical robustness and reliability during installation. The cable is designed as a compact cable with a diameter of 0.9 mm, enabling compact and flexible handling. The colour sequence in the set follows the IEC 60304 standard and includes the colours red, green, blue, yellow, white, grey, brown, violet, turquoise, black, orange, and pink. Secondary and primary coatings are colour-matched, allowing for clear identification of the fibre within the cable.

Applications
This pigtail is primarily intended for use in structured cabling systems within data communication. It is commonly used in fibre networks, particularly in environments requiring high bandwidth and short transmission distances, such as data centres, server rooms, or for connecting switches and other network devices. The OM3 classification makes it especially suitable for 10 Gigabit Ethernet applications over short distances. The bend-insensitive fibre allows for flexible installation even in confined spaces or under frequent bending stress.

Functions and Equipment in Detail
The connector is single-ended mounted, meaning the other end remains open and is intended for splicing or connection to another cable. The product is delivered with a test report documenting the insertion loss and return loss at 100 %. These tests ensure high signal quality and minimise the risk of signal loss or reflections that could impair network performance. The colour coding according to IEC 60304 facilitates identification and management of fibres within the cabling system.

Technology Explained Simply
The term LC connector refers to a small, latching connector widely used in modern fibre communication. It enables a secure and precise connection between fibres. The multimode fibre OM3 is designed for use with optical fibres that transmit multiple light modes, with OM3 offering high bandwidth for short distances. The G50/125 µm specification describes the core and cladding diameter of the fibre, where 50 µm is the core and 125 µm is the cladding. The bend-insensitive fibre according to IEC 60793-2-10 Type A1a.2 is specifically developed for applications where the cable is frequently bent or installed in tight radii without impairing optical performance.

Compatibility and Accessories
The pigtail is compatible with standard LC connectors and can be used in existing fibre networks that support OM3 fibres. As accessories, suitable shrink splicing protection (article 15090402-I) and crimp splicing protection (articles 15090401-E and 15090401-I) are available, which can be used for secure and durable connections of the pigtail to other cables or splice points. These accessories support mechanical stability and protect the fibre at the splice point.

Installation and Mounting
Installation is performed by directly connecting the LC connector to a compatible receiver, while the open fibre end is intended for splicing or connection to another cable. The bend-insensitive fibre allows flexible routing, even in confined spaces. The colour-matched coatings facilitate fibre identification during installation. The included test certification ensures that optical properties remain compliant with requirements after installation.

Operational Advantages
The use of a pigtail with LC connector and OM3 fibre provides a reliable and high-performance connection for high-speed networks. The bend-insensitive fibre reduces the risk of breaks or signal loss under frequent bending stress. The clear colour coding and documented optical properties simplify maintenance and fault diagnosis in the network. The combination of compact design and high performance makes this product a practical solution for professional fibre cabling.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/167783
qrcode für Metz Connect 150M1JO0020E Pigtail LC-PC OM3