The article 150M1AO0020E from Metz Connect is an ST-pigtail for multimode fibre networks, specifically designed for use in structured cabling systems. It is a cable with a single-sided mounted ST-connector according to IEC 61754-2 and a bare fibre end at the other end, intended for connection to a fibre cable or a splice point. The pigtail is designed for multimode fibre OM3, with a core diameter of 50 µm and a cladding diameter of 125 µm, enabling use in high-speed applications up to 10 Gbit/s over short to medium distances. The fibre is bend-insensitive according to IEC 60793-2-10 Type A1a.2, providing increased mechanical robustness and reduced risk of signal loss when bent.
Applications
This pigtail is typically used in the installation of fibre optic networks, particularly in data centres, office buildings, or industrial environments where reliable and fast data transmission is required. The use of OM3 fibres makes it especially suitable for applications with high bandwidth requirements, such as Gigabit-Ethernet or 10-Gigabit-Ethernet. The bend-insensitive fibre allows for flexible installation, even in confined spaces or complex routing situations, without impairing optical performance.
Features and Equipment in Detail
The pigtail consists of a compact cable with a diameter of 0.9 mm, enabling compact and convenient handling. The length is 2.0 m, providing sufficient reach for most installation tasks. The colour sequence in the set corresponds to the standard IEC 60304 and includes the colours red, green, blue, yellow, white, grey, brown, violet, turquoise, black, orange, and pink. This standardised colour coding facilitates identification and management of individual fibres in the network. Secondary and primary coating are colour-matched, ensuring uniform optical identification.
Technology Explained Simply
The ST-connector is a mechanical plug connector that ensures a secure and stable connection between fibre cables and network devices. It is manufactured according to the standard IEC 61754-2, which defines the geometric and mechanical requirements for ST-connectors. The fibre itself is a multimode fibre OM3, designed for high bandwidth and low attenuation at a wavelength of 850 nm. The bend-insensitive design according to IEC 60793-2-10 Type A1a.2 reduces the risk of microcracks and signal loss, even with bending radii below 30 mm. The fibre is supplied with a test report documenting insertion loss and return loss at 100 %, confirming the product's quality and reliability.
Compatibility and Accessories
The pigtail is compatible with all devices supporting an ST-connector, particularly fibre cable distributors, switches, and other network devices designed for multimode fibre OM3. As accessories, crimp splice protection elements are available, which can be used during installation to reinforce the splice point. The articles 15090401-I (150 pcs) and 15090401-E (12 pcs) from OpDAT are suitable and can be used for mechanical stabilisation of the splice.
Installation and Mounting
Installation is performed by directly connecting the ST-connector to a corresponding network connection point. The bare fibre end at the other end is typically connected to another fibre cable or a splice point. The length of 2.0 m provides sufficient clearance for installation without requiring additional extensions. The bend-insensitive fibre allows for flexible routing, even in confined spaces, without impairing optical performance.
Operational Advantages
Using this pigtail ensures high signal quality and reliability in network operation. The bend-insensitive fibre reduces the risk of signal loss due to mechanical stress. The standardised colour coding simplifies identification and maintenance of fibres. The test report with documented values for insertion loss and return loss ensures the product meets required quality standards. The compactness of the cable with a diameter of 0.9 mm facilitates routing and management in cable ducts.