Metz Connect 130E405032-E, EAN: 4250184180593

Metz Connect 130E405032-E RJ45 Plug Cat6A field installable

Networks > Junction boxes > Cat6

Metz Connect 130E405032-E RJ45 Plug Cat6A field installable

Lieske Part No. 468803
Mfg Part No 130E405032-E
EAN-Code 4250184180593
Manufacturer Metz Connect
Here only 9,43 EUR
11,22 EUR incl. VAT

Further information for Metz Connect 130E405032-E RJ45 Plug Cat6A field installable

General
Degree of protectionIP20
Cable entrystraight (180°)
Housing materialZinc die-cast
Construction type housing2-part
ShieldingFully shielded
Pre-wiredfield configurable
Connection typeIDC stripping terminals
Core connection solid coreAWG 26/1 - 22/1
Core connection stranded wireAWG 27/7 - 22/7
Conductor diameter solid core0,4 - 0,64 mm
Conductor diameter stranded wire0,46 - 0,76 mm
Cable jacket diameter5,5 - 10,5 mm
Transmission characteristicsCat.6A/Class E[A]
Data transfer rateup to 10 Gigabit-Ethernet
CompatibilityCable types Cat.6[A], 7, 7[A]
PoE supportPoE, PoE plus, UPoE, 4PPoE
Tension reliefvia snap clip on charging unit
Latching hookprotected
ColourSilver
Length/depth49,8 mm
HDBaseT supportYes
ReconnectableYes
The RJ45 connector 130E405032-E from Metz Connect is a field-terminable, fully shielded connector of category 6A, designed for use in industrial and professional networks. It enables the connection of data cables of categories 6[A], 7 and 7[A] and is suitable for data transmission rates up to 10 Gigabit-Ethernet according to IEEE 802.3an. Termination is performed without special tools, making it particularly practical for tradespeople and installers. The housing is made of zinc die-cast and consists of two parts, ensuring a robust and industrial-grade construction. The protection rating IP20 safeguards the connector against finger contact and solid foreign objects, making it suitable for indoor use.

Applications

The connector is designed for use in structured cabling systems, particularly in environments requiring high mechanical durability and reliable data transmission. It is suitable for applications in IT and telecommunications technology, such as in office buildings, factories, server rooms, or during the installation of network outlets. Support for Power over Ethernet (PoE, PoE plus, UPoE and 4PPoE) also makes it suitable for powering end devices such as IP cameras, access points or telephones. Compatibility with HDBaseT extends the range of applications to those requiring high-resolution video transmission and data transmission over a single cable.

Functions and Equipment in Detail

The connector is fully shielded and thus offers a high level of protection against electromagnetic interference (EMC). Shielding covers the entire housing and is contacted directly at the strain relief clip on the cable grip, ensuring secure shielding contact. Cable entry is straight (180°), enabling easy installation and optimal strain relief. Strain relief is achieved via a strain relief clip on the cable grip, which securely holds the cable and protects it from mechanical stress. The protected locking latch prevents accidental disconnection of the connector during operation. The IDC cutting terminals allow connection of solid and stranded conductors with a wire diameter of 0.4 to 0.76 mm, corresponding to AWG 26/1 to 22/1 for solid conductors and AWG 27/7 to 22/7 for stranded conductors. The re-terminable design allows multiple uses without tools.

Technology Explained Simply

The transmission characteristics comply with Cat.6A/Class E[A] according to ISO/IEC 11801 Ed.2.2:2011-06 and DIN EN 50173-1:2011-09. This means the connector meets the requirements for data transmission up to 10 Gbit/s over a distance of up to 100 meters. Shielding ensures low interference and high signal integrity, which is particularly important in environments with high electromagnetic noise. PoE support enables power supply over the network cable, eliminating the need for additional power sources for end devices. The field-terminable design reduces installation time and the need for special tools, making installation more efficient.

Compatibility and Accessories

The connector is designed for cable jacket diameters of 5.5 to 10.5 mm, making it compatible with a wide range of data cables. It is multiport-capable and can therefore be used in various network topologies. Suitable accessories include field-terminable RJ45 connectors such as the BTR E-DAT Industrie IP20 and the Jokari PC-STRIP cable stripper, suitable for preparing cable conductors. Combining these tools enables efficient and error-free installation.

Installation and Mounting

Mounting is performed without special tools, with IDC cutting terminals automatically cutting and connecting the cable conductors. Strain relief is achieved via the strain relief clip on the cable grip, ensuring secure cable fixation. The 180° cable entry facilitates installation in confined spaces and at outlets. Re-terminability allows flexible use, even when network changes occur.

Operational Advantages

The connector offers high mechanical stability due to the zinc die-cast housing and robust construction. Full shielding ensures reliable data transmission even in sensitive environments. Support for PoE and HDBaseT expands application possibilities and reduces the number of required cables. Easy tool-free installation reduces installation time and error probability. Re-terminability increases flexibility when making network changes.

The delivery includes the C6A RJ45 field plug pro, field-terminable RJ45 connector.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/468803
qrcode für Metz Connect 130E405032-E RJ45 Plug Cat6A field installable