ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08), IEC 60603-7-51 Ed.1 (12/2008)
Class
EA
Bandwidth
up to 500 MHz
Component test
up to 600 MHz
Link test
up to 800 MHz
PoE support
PoE, PoE+, UPoE, 4PPoE
Maximum PoE power
90 W
Ethernet support
10GBit Ethernet (IEEE 802.3an)
Material
zinc die-cast, nickel-plated
Scope of delivery
C6A module 2 port 270 degree UPk pure white outlet
HDBaseT support
The Metz Connect connection outlet type 130B12D21102-E is a modular in-wall network outlet with two Cat.6A connection ports, designed for use in professional network infrastructures. It serves as a connection point for data lines in the field of telecommunications and enables the connection of end devices such as computers, telephones, or network devices to a network cable. The outlet is designed for installation in standard in-wall and hollow wall boxes and features a robust, two-piece module made of nickel-plated zinc die-cast, which allows for easy and error-free installation without special tools. The surface of the cover parts is pure white (RAL 9010) and has a matte structure, enabling visual harmonization with other switch and socket programs.
Applications
The connection outlet is suitable for use in office buildings, industrial facilities, and other installations with high requirements for network performance. It supports data transfer rates up to 10 GBit/s (10GBit Ethernet according to IEEE 802.3an) and is designed for power supply over the network cable (Power over Ethernet, PoE), including PoE+, UPoE, and 4PPoE, with a maximum power of 90 W supported. The outlet is therefore suitable for powering IP telephones, surveillance cameras, access points, and other PoE-enabled devices. Compatibility with design center pieces from switch programs allows for a uniform design of wall installations.
Functions and Equipment in Detail
The outlet features two Cat.6A ports with a plug orientation of 270 degrees, where the module is tilted 45 degrees downward to ensure optimal accessibility and placement in the box. The connection terminals are designed as IDC cutting terminals, suitable for connecting data lines with cross-sections AWG 26/1 to 22/1 (single-strand) as well as AWG 26/7 to 22/7 (multi-strand). A strain relief with a snap clip on the load piece protects the cable from mechanical stress. Integrated dust protection flaps prevent dust and dirt from entering when the outlet is not in use. A viewing window allows for the insertion of a labeling insert to clearly identify the function or connection point.
Technology Explained Simply
The connection outlet meets the requirements of Class EA up to 500 MHz according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, and is certified for component testing according to TIA/EIA-568-C.2 (2009-08) as well as IEC 60603-7-51 Ed.1 (12/2008). The component was tested up to 600 MHz, the link up to 800 MHz, ensuring high bandwidth and signal quality. The GHMT Cat.6A re-embedded PVP certification confirms the quality and reliability of the component. The outlet is therefore suitable for applications in high-speed networks, including HDBaseT transmissions.
Compatibility and Accessories
The connection outlet is compatible with various mounting brackets, including T-nut mounting units in 50 mm and 55 mm width, both with and without partition shells, as well as mounting brackets for rail mounting. Matching cover plates and surface-mounted frames (85 x 85 x 43 mm, pure white) are also available to enable use in different installation scenarios. The use of mounting brackets allows for flexible and secure fastening in various wall constructions.
Installation and Mounting
The outlet is mounted in standard in-wall and hollow wall boxes. Installation is performed by inserting the module into the box, where the strain relief and plug orientation of the module support correct placement. The IDC cutting terminals enable quick and secure connection of data lines. The outlet is delivered in standard cardboard packaging with 10 pieces per pack.
Operational Advantages
The robust construction made of nickel-plated zinc die-cast ensures long service life and high mechanical stability. The integrated dust protection flaps and the viewing window for labeling increase user-friendliness. Support for PoE up to 90 W and 10 GBit/s enables flexible use in modern networks. Compatibility with design center pieces and the availability of various mounting options facilitate integration into existing installations.