The connection unit 130B127003-E from Metz Connect is a REGplus IP20 unit, specifically designed for mounting on the TH35 support rail according to DIN EN 60715 in electrical distribution boards for residential and industrial installations. It is equipped with a Cat.6A module in 270° format, providing an RJ45 connection for individual links. The unit enables a cable access angle of 45° from below and a plug orientation inclined 45° downward, supporting a compact and space-efficient installation in distribution boards. The width of 1TE allows up to 12 REGplus modules to be installed in standard electrical distribution boards, enabling high density in limited space.
Applications include cabling in buildings where a stable and future-proof network infrastructure is required. The unit is intended for use in electrical distribution boards installed in residential and industrial facilities. The protection rating IP20 ensures protection against contact with fingers and against solid foreign objects, but not against water or dust – thus suitable for indoor use only, not for outdoor environments.
Functions and equipment in detail include a GHMT Cat.6A re-embedded PVP certified module, meeting the requirements of standards ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D, and IEC 60603-7-51. Component testing is carried out according to the mentioned standards, ensuring compliance with Class E, A up to 500 MHz as per ISO/IEC 11801 and DIN EN 50173-1. The component has been tested up to 600 MHz, and the link up to 800 MHz, enabling use for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE), and HDBaseT. The IDC cutting terminals allow for easy installation of data cables with cross-sections AWG 26/1 to 22/1 (single-strand) and AWG 26/7 to 22/7 (multi-strand). The wire mapping T568A and T568B is directly marked on the insert, facilitating correct cabling.
Technology explained simply shows that the unit features an integrated dust protection cover, protecting the module from direct contact. When mounted in protected insulated distribution boards, protection class II is maintained, requiring the removal of the integrated equipotential bonding spring. When installed as a device of protection class I, equipotential bonding is achieved via an integrated equipotential bonding plate, connected to the building’s equipotential bonding via the support rail. The dust protection cover is also available in other colours, allowing visual coordination within the distribution board.
Compatibility and accessories include use with other modules from the REGplus series, such as the 130B11-E Cat.6A 180° socket module or the 130B117003-E REGplus IP20 Cat.6A 180° M module. The unit is part of a modular system enabling flexible expansion of the distribution infrastructure. The use of coaxial modules such as 130898-01-I or optical modules such as 15091072-I is also possible, provided the respective modules are integrated into the system.
Mounting and installation is done by securing to the TH35 support rail. The unit is designed for use in electrical distribution boards, with mounting standardized by the specified width of 1TE. The IDC cutting terminals allow for quick and secure connection of data cables. The integrated equipotential bonding spring enables compliance with protection class I, while for protection class II, the spring must be removed.
Operational advantages lie in high bandwidth and compatibility with modern network protocols. The unit supports high data rates and power delivery over the network cable (PoE), simplifying the installation of IP cameras, access points, or other PoE-enabled devices. The modular design enables flexible expansion and maintenance of the distribution infrastructure. The integrated dust protection cover protects the module from contamination and unauthorized access.