Further information for Metz Connect 130B11P0-E Panel 1HE 24x C6A Cat.6A
General
Category
6A
Class
EA
Maximum frequency
500 MHz
Component test frequency
600 MHz
Link test frequency
800 MHz
Ethernet standard
10GBit Ethernet (IEEE 802.3an)
PoE support
PoE, PoE plus, UPoE, 4PPoE
Connection type
IDC stripping terminals
Cable cross-section (solid)
AWG 26/1 - 22/1
Cable cross-section (stranded)
AWG 26/7 - 22/7
Number of modules
24
Module type
180° socket
Module carrier format
19 inch, 1HE
Front material
silver anodised aluminium
Module holder material
Plastic
Module extractability
Removable from front
Cable strain relief
Integrated
Tension relief
Additional option available
Grounding stud
M6 x 10
Grounding cable
30 cm
Certification
GHMT, re-embedded PVP
Compliance with standards
ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D, IEC 60603-7-51
Dust protection flaps
Viewing window
Earthing bar
The Metz Connect 130B11P0-E is a 19-inch 1HE module carrier for installation in rack systems, equipped with 24 individual modules of Category 6A, Class EA. It serves as a patch panel for structured cabling in data and communication networks. The modules are designed as 180° sockets, enabling compact, rear-side cabling. The front side of the module carrier consists of silver anodized aluminium, providing a robust and visually appealing surface. The module holders are made of grey plastic and feature integrated dust protection covers that can be removed forward to facilitate access to the connections. Additional colours for the dust protection covers are available as accessories.
Applications
This patch panel is designed for use in professional network infrastructures, particularly in data centres, server rooms, and office buildings with high requirements for bandwidth and signal integrity. It is suitable for applications such as 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE), HDBaseT, SAT-IP and AVoverIP. The maximum frequency transmission is 500 MHz, with the component tested up to 600 MHz and the link up to 800 MHz. This ensures stable data transmission even under high loads and over long distances.
Functions and Equipment in Detail
The modules are fully shielded and interconnected via an earthing strip to minimize electromagnetic interference. The connection terminals are IDC crimp terminals, designed for connecting data cables with AWG 26/1 to 22/1 (single-strand) and AWG 26/7 to 22/7 (multi-strand). Installation is tool-free, which accelerates mounting and reduces error sources. The integrated cable strain relief ensures proper cable routing, with additional strain relief possible to avoid mechanical stress.
Technology Explained Simply
Category 6A (Cat.6A) and Class EA comply with international standards ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51. These standards guarantee high performance and compatibility with modern network standards. The GHMT certification (Generic Hardware Module Technology) confirms the quality and reliability of the components. The re-embedded PVP certification (Performance Verification Program) ensures compliance with specified performance parameters. Earthing is achieved via a bolt M6 x 10 with nut and lock washer, including a 30 cm long earthing cable, to ensure safe and effective earthing of the entire module carrier.
Compatibility and Accessories
The patch panel is compatible with various accessories, including E-DAT modules Cat.6A Class EA, 25G modules GHMT certified according to ISO/IEC TR-11801-9905, as well as coaxial and LC duplex modules for fibre optic applications. The module holders are removable forward, enabling easy maintenance and replaceability. A viewing window on the front side allows placement of a labelling insert, with a labelling sheet in format 210 x 297 mm available as an accessory.
Mounting and Installation
Mounting is performed in a 19-inch rack in 1HE format. The front plate made of anodized aluminium and the modular mounting elements facilitate installation. The tool-free mounting of the modules reduces installation effort. The integrated cable strain relief and the option for additional strain relief ensure proper and stress-free cabling.
Advantages in Operation
The patch panel offers high reliability and performance for modern networks. The fully shielded modules and common earthing strip minimize interference. The tool-free mounting and modular design simplify maintenance and expansion. Support for PoE technologies enables power supply over the network cable, simplifying installation of end devices such as IP cameras or access points. Compatibility with 10GBit Ethernet and higher frequencies makes the patch panel suitable for future requirements.