| General |
| Category | Cat.6A - |
| Frequency range | 500 MHz |
| Certification | GHMT Cat.6A re-embedded PVP - |
| PoE support | Yes - |
| Max. PoE power | 90 W |
| Number of ports | 2 - |
| Angle of plug | 180° M - |
| Mounting method | Flush mounted (plaster) - |
| Material | zinc die-cast, nickel-plated - |
| Surface protection | matt structured - |
| Colour | Clear white RAL 9010 |
| Terminal clamps | IDC stripping terminals - |
| Tension relief | with latch clip - |
| Dust protection cover | Integrated - |
| Viewing window | for label insert - |
| Compatibility | Design central units for switchgear programs - |
| Data lines | AWG 24/1 - 22/1 (solid), AWG 26/7 - 22/7 (stranded) - |
| Network standard | 10 GBit Ethernet (IEEE 802.3an) - |
| Component testing | ISO/IEC 11801 Ed.2.2, TIA/EIA-568-C.2, IEC 60603-7-51 - |
| Tested frequency | Component up to 600 MHz, link up to 800 MHz - |
The Metz Connect connection outlet type 130B11D21002-E is a modular in-wall network connection outlet for use in passive network infrastructures with high quality requirements. The device is designed for connecting telephone systems up to 10 Gbit/s networks and supports power supply via PoE with a power output of up to 90 watts. The module consists of two parts and is made of nickel-plated zinc die-cast, ensuring high mechanical robustness and longevity. Installation is carried out without special tools and can be quickly and error-free performed by installers. Quality is confirmed by continuous in-process controls as well as certifications by independent testing laboratories. The connection outlets are delivered in carton packaging with 10 pieces each.
Applications
The connection outlet is suitable for use in office buildings, industrial facilities, and other facilities where a reliable and high-quality network infrastructure is required. It supports both classic telephone applications and modern data transmissions up to 10 Gbit/s. The support for PoE enables the power supply of end devices such as IP telephones, network cameras, or access points directly via the network cable, eliminating the need for additional power supplies. The outlet is designed for in-wall installations and is not suitable for standard in-wall or hollow wall boxes.
Functions and equipment in detail
The module features two RJ45 ports and is designed for connecting data cables with AWG 24/1 to 22/1 (single-conductor) and AWG 26/7 to 22/7 (multi-conductor) to IDC stripping terminals. The integrated strain relief with a snap clip on the insert protects the cables from mechanical stress. An integrated dust protection cover ensures a clean connection area, while a viewing window allows labeling of the connection outlet. The cover parts are finished in pure white color (RAL 9010) with a matte structured surface. The outlet is compatible with design center pieces from switch programs, enabling a uniform design of installation points.
Technology explained simply
The connection outlet complies with Category Cat.6A and is certified for frequencies up to 500 MHz according to ISO/IEC 11801 Ed.2.2 (2010). Component testing is carried out in accordance with ISO/IEC 11801 Ed.2.2 (2010), TIA/EIA-568-C.2 (2009-08), and IEC 60603-7-51 Ed.1 (12/2008). The tested component reaches frequencies up to 600 MHz, and the link up to 800 MHz. The outlet is GHMT Cat.6A re-embedded PVP certified, confirming its high performance and reliability. Support for PoE (Power over Ethernet) enables power supply of end devices via the network cable, reducing the number of required power connections. The outlet is suitable for 10 GBit Ethernet (IEEE 802.3an) and also supports remote powering technologies such as PoE, PoE plus, UPoE, and 4PPoE.
Compatibility and accessories
The connection outlet is compatible with various mounting brackets, including T-nut mounting elements in 50 mm and 55 mm lengths, both with and without partition shells, as well as mounting brackets for rail mounting. Additionally, cover plates and surface-mounted frames are available, enabling flexible installation. The outlet is suitable for use with other modules from the manufacturer, particularly Cat.6A modules in various port configurations. Compatibility with design center pieces from switch programs enables a uniform design of installation points.
Mounting and installation
Mounting is carried out in the in-wall area, and the outlet must not be installed in standard in-wall or hollow wall boxes. Installation is performed without special tools, with the module's insertion direction inclined 45 degrees downward. The strain relief with a snap clip on the insert protects the cables from mechanical stress. The outlet is designed for quick and error-free installation, with its robust construction made of nickel-plated zinc die-cast ensuring a long service life.
Advantages in operation
The connection outlet offers high reliability and performance for modern network applications. PoE support reduces the number of required power connections and simplifies installation. The integrated dust protection cover and viewing window for labeling improve maintainability and clarity. Compatibility with design center pieces enables a uniform design of installation points. The robust construction and certifications by independent testing laboratories guarantee high quality and longevity.