| General |
| Category | Cat.6A |
| Port count | 1 |
| Mounting method | Flush mounted (plaster) |
| Colour | Clear white |
| Colour code | RAL 9010 |
| Surface finish | matt structured |
| Angle of plug | 45° downward angled |
| Tension relief | latching clip on charging unit |
| Terminal clamps | IDC stripping terminals |
| Data lines | AWG 24/1 - 22/1 (solid), AWG 26/7 - 22/7 (stranded) |
| Component testing | ISO/IEC 11801 Ed.2.2 (2010), TIA/EIA-568-C.2 (2009-08), IEC 60603-7-51 Ed.1 (12/2008) |
| Class | EA up to 500 MHz |
| Frequency bandwidth | Component up to 600 MHz, link up to 800 MHz |
| Ethernet standard | 10 GBit Ethernet (IEEE 802.3an) |
| PoE support | PoE, PoE+, UPoE, 4PPoE |
| Maximum PoE power | 90 W |
| Dust protection flaps | Integrated |
| Label insert | with viewing window |
| Material | zinc die-cast, nickel-plated |
| Certification | GHMT certified |
| Compatibility | Design central units for switchgear programs |
The Metz Connect connection socket type 130B11D11002-E is a modular
network connection module for flush mounting, designed for use in passive network infrastructures with high quality requirements. The device features a single RJ45 port and is designed for use in
Cat.6A networks, with component testing according to ISO/IEC 11801 Ed.2.2 (2010), TIA/EIA-568-C.2 (2009-08), and IEC 60603-7-51 Ed.1 (12/2008). The connection socket is GHMT certified and meets Class EA up to 500 MHz according to ISO/IEC 11801 Ed.2.2. The tested frequency bandwidth is up to 600 MHz for the component and up to 800 MHz for the link, enabling use for
10 GBit Ethernet (IEEE 802.3an). Additionally, the module is suitable for
Power over Ethernet (PoE), including PoE+, UPoE, and 4PPoE, with a maximum power of up to 90W. The connection socket is designed for connecting telephones as well as data transmission systems up to 10 Gbit/s.
Applications include installation in office buildings, industrial facilities, and other environments where a reliable, high-quality network infrastructure is required. The module is specifically designed for flush installations and can be integrated into design central units of switch programs. However, it is not suitable for mounting in standard flush or hollow wall boxes. The insertion direction of the module is inclined 45° downward, enabling ergonomic operation. The integrated
dust protection flaps protect the connection from contamination when no device is connected. A viewing window allows labeling of the connection socket with an included label insert to ensure clear identification.
Functions and equipment in detail include the use of IDC stripping terminals for securing data cables. The connection socket supports single-conductor cables in the range AWG 24/1 to 22/1, as well as multi-conductor cables from AWG 26/7 to 22/7. Tension relief is achieved via a snap clip on the load piece, ensuring a secure and durable connection. The module consists of two parts and is made of nickel-plated zinc die-cast, providing high mechanical robustness and corrosion resistance. Installation is performed without special tools, making it quick and error-free for installers.
Technology explained simply shows that the connection socket is designed for transmitting data and power over a single cable (PoE). The Cat.6A classification guarantees high data transfer rates and low signal interference, which is important for critical applications in businesses. The frequency bandwidth of up to 600 MHz for the component and 800 MHz for the link enables a stable connection even at high data rates. Certification according to GHMT and compliance with international standards such as ISO/IEC 11801 and TIA/EIA-568-C.2 ensure compatibility and reliability in the network.
Compatibility and accessories include use with suitable mounting holders such as T-slot or support rail fittings, available in various lengths (50 mm, 55 mm) and with or without a partition shell. Additionally, cover plates and surface-mounted frames in pure white finish are available, enabling a uniform visual design. The connection socket is compatible with design central units of switch programs, facilitating integration into existing installations.
Mounting and installation is carried out in flush installations, where the module is inserted into the designated opening and secured using appropriate mounting aids. The 45° downward insertion direction facilitates the insertion of network cables. The use of IDC stripping terminals enables quick and secure connection of data cables. Tension relief with a snap clip ensures that the cable is not damaged by pulling forces.
Operational advantages include high reliability, easy installation, and long-term stability of the connection. The integrated dust protection flaps prevent contamination, and the label insert enables clear identification. Support for PoE up to 90W allows power supply of end devices such as IP cameras or access points directly via the network cable, eliminating the need for additional power cables. Certification and quality control guarantee high performance and longevity of the module.
The connection socket is delivered in retail-friendly carton packaging with 10 pieces per pack. The cover parts are finished in pure white (RAL 9010) with a matte structured surface, enabling a uniform visual design in indoor environments. Installation is performed without special tools, making it efficient and error-free for installers. The connection socket is designed for flush installations and is not suitable for standard flush or hollow wall boxes.