| General |
| Degree of protection | IP20 |
| Mounting method | TH35 mounting rail |
| Mounting width | 1 modular spacing |
| Colour | Light grey |
| Compatibility | E-DAT module, E-DAT module coupling 180°, UAE module, OpDAT module LC-D and ST, coax modules |
| Earthing | integrated equipotential bonding spring |
| Dust protection cover | Integrated |
| Manufacturer | Metz Connect |
| Status | unpopulated |
The connection unit 1309426103-E from Metz Connect is an unpopulated E-DAT module REG unit in light grey finish, designed for mounting on a TH35 support rail in accordance with DIN EN 60715. The width of 1 TE allows up to 12 such units to be installed in standard electrical distribution boxes, enabling a compact and structured cabling solution within distribution cabinets. The unit is designed to accommodate a single module, providing a flexible base for various applications in data communication. The integrated equipotential bonding spring enables equipotential bonding via the support rail when installed as a Class I device, with the connection terminals required to be connected to the building’s equipotential bonding system. When mounted in insulated distribution units, protection class II is maintained, requiring the removal of the equipotential bonding spring.
Applications
This connection unit is suitable for use in electrical distribution cabinets, particularly in buildings with structured cabling. It is intended for installation of modules such as E-DAT module, E-DAT module coupling 180°, UAE module, OpDAT module LC-D and ST, as well as coaxial modules. The integrated dust protection flap protects the module from contamination and provides a closed finish when no module is installed. The light grey colour variant (RAL 7035) visually integrates into typical distribution environments. The protection rating IP20 ensures protection against contact with fingers and solid foreign objects, but not against water or dust, which restricts its use to indoor environments.
Functions and Equipment in Detail
The unit is unpopulated and requires separate installation of a module. The integrated cover protects the module from direct contact, enhancing operational safety. The dust protection flap is permanently integrated and cannot be removed, simplifying cleaning and maintenance. Mounting is performed on a TH35 support rail, commonly used in standard electrical distribution cabinets. The width of 1 TE corresponds to a standard dimension, enabling high density of connection points. The equipotential bonding spring is included by default but can be removed if necessary to maintain protection class II in insulated distribution units.
Technology Explained Simply
The connection unit is a passive component that performs no electrical function, serving only as a holder for an active module. The protection rating IP20 means the unit is protected against contact with fingers and solid foreign objects, but not against water or dust. The TH35 support rail is a European standard for mounting components in distribution cabinets. The width of 1 TE (unit width) corresponds to a height of 17.5 mm, enabling a compact arrangement. The equipotential bonding spring ensures a safe earth connection via the support rail for Class I devices.
Compatibility and Accessories
The unit is compatible with various modules, including E-DAT module, E-DAT module coupling 180°, UAE module, OpDAT module LC-D and ST, as well as coaxial modules. It is explicitly noted that it is not suitable for C6 modules or Amodul. Suitable accessories include, for example, the 130898-00-RW-I BLIND module pure white, the BTR E-DAT module Cat.6A Class EA for tool-free cable installation, the 130910-Z E-DAT module Cat.6A 8(8) socket (12 pieces), and the 1309A0-I E-DAT module coupling 8(8) 180° Class EA. These modules can be installed into the connection unit to achieve the desired functionality.
Mounting and Installation
Mounting is performed by inserting the connection unit into a TH35 support rail within the electrical distribution cabinet. The unit is designed to be easily inserted into the rail and securely seated. When used as a Class I device, the equipotential bonding spring must be connected via connection terminals to the building’s equipotential bonding system. When mounted in insulated distribution units, removal of the equipotential bonding spring is required to ensure protection class II. The integrated dust protection flap remains in the unit at all times, protecting the module even when no module is installed.
Operational Advantages
The connection unit provides a compact and flexible solution for integrating data connections into electrical distribution cabinets. Standardization on TH35 and 1 TE enables high density of connection points. The integrated dust protection flap enhances operational safety and reduces maintenance. The option to remove the equipotential bonding spring expands usability in insulated distribution units. Compatibility with various modules allows application-specific configuration without replacing the base unit.