| General |
| Colour | Light grey |
| Length/depth | 60 mm |
| Degree of protection | IP20 |
| Cable access | 45 degrees from top |
| Angle of plug | inclined 45 degrees downward |
| Class | EA |
| Standard | ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 |
| Bandwidth | 500 MHz |
| Ethernet standard | 10GBit Ethernet (IEEE 802.3an) |
| PoE support | PoE, PoE plus, UPoE |
| Cable type | 2- to 4-pair data cable AWG 26/1 – 22/1, stranded wire AWG 26/7 – 22/7 |
| Connection type | BTR 8-way IDC terminal blocks |
| Core wiring | T568A or T568B |
| Mounting width | 1 modular spacing |
| Earthing | integrated sheet metal over mounting rail |
| Dust protection cover | Integrated |
| Cover | Protecting against direct contact |
| Mounting method | on TH35 mounting rail |
| Application range | Electrical distribution boards for residential and industrial installations |
| Compatibility | 10GBit Ethernet, PoE, HDBaseT |
| Module type | E-DAT module RJ45 single module |
| Cable mounting | Tool-free |
| Scope of delivery | E-DAT module REG 8(8)1 Port IP20 Cat.6A light grey |
The Metz Connect installation unit type 1309426003-E is an installation socket for mounting on a TH35 support rail in accordance with DIN EN 60715, specifically designed for use in electrical distributors in the field of residential and industrial installations. The device is equipped with an E-DAT module RJ45 single module and serves as a network connection point for data transmission in the Cat.6A standard. The unit is finished in light grey and allows cable access at a 45-degree angle from above, with a plug orientation inclined 45 degrees downward, ensuring a comfortable and space-efficient installation.
Applications
The installation unit is designed for use in standard electrical distributors, particularly in buildings with structured cabling systems. The width of 1 TE allows up to 12 units to be installed in a standard distributor, enabling a high density of connections in limited space. The unit is suitable for use in industrial and residential buildings where a reliable and high-performance data connection is required. The integrated dust protection cover protects the module from contamination and unintended contact.
Functions and Equipment in Detail
The device is equipped with an E-DAT module RJ45 single module, which complies with class EA according to ISO/IEC 11801 Ed.2.2:2011-06 and DIN EN 50173-1:2011-09. It has been tested for a bandwidth up to 500 MHz, enabling use for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE), and HDBaseT. Mounting is done on BTR 8-way IDC stripping terminals, designed for 2- to 4-pair data cables AWG 26/1 – 22/1, as well as stranded conductors with 7-wire Cu stranded AWG 26/7 – AWG 22/7. The wire assignment can be made according to T568A or T568B, with the designation indicated directly on the module. Inserting the wire pairs into the loading piece is easy and quick.
Technology Explained Simply
The installation unit uses BTR 8-way IDC stripping terminal technology, ensuring a secure and durable connection between the data cable and the module. The stripping terminals allow for a mechanically stable connection without additional tools. The integrated equipotential bonding plate ensures direct contact with the support rail when installed as a device of protection class I, which must be connected to the building’s equipotential bonding system via contact clamps. When mounted in a protection-insulated distributor, protection class II remains if the equipotential bonding spring is removed. The module cover protects against direct contact, increasing safety.
Compatibility and Accessories
The module is compatible with various accessories, including blank modules, LC duplex modules for fiber optics, E-DAT module couplings, and other Cat.6A modules. Combining it with other modules enables flexible use in different network environments. The installation unit is suitable for use with 10GBit Ethernet, PoE technologies, and HDBaseT, making it particularly suitable for modern network applications in office and industrial facilities.
Mounting and Installation
Mounting is done on a TH35 support rail, commonly used in electrical distributors. The unit is designed to be mounted without additional tools. The cable access angle of 45 degrees from above and the downward-angled plug orientation facilitate installation, especially in tight distributors. The width of 1 TE allows for a high density of connections. The integrated dust protection cover protects the module from contamination and unintended contact.
Operational Advantages
The installation unit offers high performance with support for 10GBit Ethernet and PoE technologies. The simple mounting and secure connection via IDC stripping terminals ensure a reliable and durable connection. The integrated dust protection cover and module cover increase safety and extend the module’s lifespan. Compatibility with various accessories enables flexible use in different network environments.