| General |
| Number of ports | 1 |
| Colour | Clear white |
| Colour code | RAL 9010 |
| Surface protection | matt structured |
| Angle of plug | 45° downward angled |
| Tension relief | with cable tie on module |
| Viewing window | for label insert |
| Dust protection flaps | Integrated |
| Compatibility | E-DAT module |
| Data rate | 10 GBit/s |
| Norm | IEEE 802.3an |
| Category | Cat.6A |
| Class | EA |
| Bandwidth | 500 MHz |
| Certification | GHMT Cat.6 de-embedded PVP |
| Wiring | 2- to 4-pair data cable AWG 24/1 – 22/1, stranded conductors AWG 26/7 |
| Connection type | BTR 8-way IDC terminal blocks |
| Mounting method | Surface mounted (plaster) |
| Label sheet | 209 x 294 mm |
The Metz Connect connection outlet type 1309140002-E is a surface-mounted connection unit for single modules in modular design, designed for use in structured cabling systems. The cover parts are finished in pure white (RAL 9010), with a matte structured surface that visually integrates into typical office and commercial environments. The dimensions of the unit are 85 x 85 x 35 mm, with the front plate having a square shape.
Applications
The connection outlet is designed for indoor use, particularly in offices, administrative buildings, or technical rooms where structured network cabling is required. It serves as an access point for data communication via Ethernet connections. The unit is intended for surface mounting, meaning it is directly mounted on the wall without requiring a cutout in the wall structure.
Functions and Equipment in Detail
The module’s insertion direction is angled 45° downward, enabling ergonomic operation and improved cable management. An integrated strain relief on the module, implemented via a cable tie, protects the cabling from mechanical stress. The connection outlet features a viewing window that can accommodate a label insert, facilitating identification of the connection during operation. A label sheet in format 209 x 294 mm is available as accessory. Additionally, integrated dust protection flaps are present, protecting the connection from contamination and also available in colored variants.
Technology Explained Simply
The connection outlet is designed for use with E-DAT modules, enabling data transmission up to 10 GBit/s (according to IEEE 802.3an). The performance class corresponds to Cat.6A Class EA, ensuring a bandwidth up to 500 MHz as per ISO/IEC 11801:2008 Ed.2.1. The unit is suitable for Power over Ethernet (PoE and PoE+), allowing both data and power to be transmitted over the network cable. The mounting technology uses BTR 8-way IDC stripping terminals, designed for 2- to 4-pair data lines with AWG 24/1 – 22/1, as well as stranded conductors with 7-wire CU stranded wire AWG 26/7. The GHMT Cat.6 de-embedded PVP certification confirms compliance with relevant standards.
Compatibility and Accessories
The connection outlet is specifically designed for E-DAT modules. It should be noted that C6, Amodul, and E-DAT module couplings 8(8) are not compatible. Various accessories are available, including a cover plate 80x80 mm pure white, a BTR E-DAT module Cat.6A Class EA for cable mounting without tools, an E-DAT module 1 Port AP Cat.6A pure white, an E-DAT module Cat.6A 8(8) socket (12 pieces), an E-DAT Cat.6A 1-Port AP pure white connection outlet, and a surface mounting frame 85x85 mm 1-way pure white. These components enable flexible and modular expansion of the system.
Mounting and Installation
Installation is carried out in surface-mounted configuration, with the unit directly fixed to the wall. The integrated strain relief and the 45° insertion angle facilitate installation and ensure proper cabling. The data line connection is made via IDC stripping terminals, enabling tool-free installation.
Operational Advantages
The connection outlet provides a clear and structured cabling solution with high data transmission performance. The integrated dust protection flaps and the viewing window for labeling improve maintainability and identification. Compatibility with PoE and PoE+ allows power supply of end devices such as IP cameras or access points via the network cable, reducing the number of power supply lines. The modular design enables flexible system expansion.