| General |
| Cable type | Patch cable |
| Category | Cat.6A |
| Conductor cross section | AWG 26/7 |
| Degree of protection | fully shielded cable |
| Connector | two shielded RJ45 connectors |
| Circuitry | 1-1 |
| Bend protection | molded strain relief sleeve with integrated latch lever protection |
| Colour | Blue |
| Certification | GHMT PVP |
| Application | for 10 GBit Ethernet (IEEE 802.3an), PoE, PoE plus, UPoE, HDBaseT |
| Material | LaBS-free, halogen-free |
| Packaging | 1 piece in poly bag |
The Metz Connect patch cable type 1308451544-E is a fully shielded RJ45 network cable of category
Cat.6A, manufactured with AWG 26/7. It is designed for secure connection of network components and enables the transmission of voice, data, audio/video, and PoE signals in bandwidth-intensive environments. The cable is GHMT PVP certified and particularly suitable for unshielded and shielded Class E, A systems. It supports data rates up to 10 GBit/s according to IEEE 802.3an and is designed for remote powering (PoE, PoE plus and UPoE) as well as HDBaseT applications.
Applications
This patch cable is designed for use in professional network infrastructures, particularly in environments where high bandwidth and signal integrity are required. It is suitable for connecting switches, routers, PCs, network devices, and other end devices. The use in shielded and unshielded systems of category E and A is explicitly supported, making it suitable for various installation scenarios in office and industrial facilities.
Functions and features in detail
The cable features two shielded RJ45 connectors with wiring 1-1, ensuring a direct, non-crossed connection. The connectors are equipped with a moulded strain relief boot that provides an integrated latch lock protection. This prevents accidental disconnection and protects the connection from mechanical stress. The strain relief boot is designed with the same width as the RJ45 connector, ensuring optimal fit and mechanical stability. The cable is LaBS-free and halogen-free, increasing safety in case of fire and minimizing the emission of toxic fumes.
Technology explained simply
The designation
Cat.6A refers to category 6A, which supports a maximum bandwidth of 500 MHz and is therefore suitable for 10-Gigabit-Ethernet applications. The AWG 26/7 designation describes the conductor cross-section (26 American Wire Gauge) and the number of wires per conductor (7), ensuring stable signal transmission. The full shielding (fully shielded cable) reduces electromagnetic interference and ensures high signal quality, especially in environments with high electromagnetic noise. The GHMT PVP certification confirms compliance with quality and safety standards for network cables.
Compatibility and accessories
The patch cable is compatible with unshielded and shielded Class E, A systems. It can be combined with other patch cables from the same product series, such as variants available in lengths of 0.5 m, 1 m, 2 m, 3 m, 5 m, 7 m, also in blue colour and Cat.6A configuration. Colour variants include black, white, grey, red, blue, yellow, green, orange-black, violet-black, and purple-black, with blue being the colour for the current item. The packaging unit is 1 piece in a poly bag (item number ending -E). Additional variants can be created via a configurator.
Installation and mounting
Installation is performed by simply inserting the RJ45 connectors into the corresponding sockets of the network components. The strain relief boot and integrated latch lock protection ensure a secure and long-lasting connection. Cable extension is done without additional tools, as the connectors plug in directly. Use in shielded and unshielded systems does not require special mounting aids.
Operational advantages
The cable provides reliable signal transmission with high bandwidth and low interference. Shielding and robust connector design ensure long service life and minimize failures. Support for PoE technologies enables power supply over the network cable, simplifying installation of devices such as IP cameras or access points. The halogen-free and LaBS-free design increases safety in case of fire.