| General |
| Port count | 2 |
| Mounting method | Underfloor (UP) |
| Cable type | AWG26/1 - 22/1 (solid) |
| Data transfer rate | 10 Gbit/s |
| PoE power | 90 W |
| Frequency range | 500 MHz |
| Degree of protection | Integrated dust protection flaps |
| Material | Zinc die-cast |
| Connection type | RJ45 |
| Compliance with standards | ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 |
| Cable entry | 8 sides |
| Text | Viewing window for label insert |
| Mounting aids | T-nut, mounting rail fixation |
The Metz Connect connection outlet type 1307381002-I is a flush-mounted connection unit for network applications designed on the basis of Category 6 (Cat6). It features two 8-position RJ45 sockets and is designed for use in passive network infrastructures with high quality requirements. The outlet is suitable for connecting telephone systems as well as data transmissions up to 10 Gbit/s in accordance with the Ethernet standard IEEE 802.3an. Additionally, it supports power over Ethernet (PoE), including PoE+, PoE++ (UPoE) with a maximum power of 90 watts. The robust construction made of zinc die-cast enables easy and error-free installation by the installer using an LSA installation tool. The connection outlet is delivered in trade-friendly carton packaging with 10 pieces each.
Applications
The connection outlet is intended for use in office buildings, industrial facilities, and other installations with structured cabling systems. It is suitable for integration into standard flush-mounted boxes and hollow wall boxes. Cable entry is practical from eight sides, enabling flexible installation in various wall constructions. The integrated dust protection flaps protect the sockets from contamination and are also available in other colors. A viewing window allows for the insertion of a label to facilitate identification of connections.
Functions and Equipment in Detail
The outlet features two RJ45 connectors designed for connecting data cables with a cross-section of AWG26/1 to AWG22/1 (single-strand). The screwing of the flap for strain relief and shielding removal is done from the front, simplifying installation. Compliance with Class EA according to ISO/IEC 11801 Ed.2.2:2011-06 and DIN EN 50173-1:2011-09 ensures compatibility with modern network standards. The connection outlet is intended for use in flush-mounted installations (UP) and can be mounted in standard flush-mounted boxes.
Technology Explained Simply
The connection outlet is tested for data transmissions up to 500 MHz, enabling high bandwidth and low signal distortion. Support for 10 Gbit/s Ethernet (IEEE 802.3an) makes it suitable for demanding network applications. The PoE function allows power supply to end devices such as IP phones, surveillance cameras, or access points via the network cable, eliminating the need for additional power sources. The zinc die-cast housing ensures mechanical stability and protection against external influences.
Compatibility and Accessories
The connection outlet is compatible with various mounting brackets, including T-nut mounting units in 50 mm and 55 mm width, both with and without partition shells, as well as track mounting fixtures. Suitable accessories include mounting brackets for horizontal installation, surface-mounted frames in 85x85 mm, and various module variants such as the E-DAT Cat6A 2 Port UP pure white. The outlet can also be combined with other modules available in the E-DAT product series.
Installation and Mounting
Installation is carried out in flush-mounted boxes, with cables being fed from eight sides. The front-side screwing of the flap simplifies installation and ensures secure fastening. The connection outlet is connected using an LSA installation tool, enabling error-free and quick installation. The use of standard flush-mounted boxes and hollow wall boxes is intended.
Operational Advantages
The connection outlet offers high mechanical stability due to its zinc die-cast body and reliable electrical connection. Support for PoE up to 90W enables power supply to high-performance end devices without additional power sources. The integrated dust protection flaps and viewing window for labeling improve maintainability and clarity of the installation. Compliance with international standards such as ISO/IEC 11801 and DIN EN 50173-1 ensures compatibility with modern network systems.