LTC

LTC H07V-K 6,0 SW Cable 6 mm² black

Cables > Installation systems and industrial management > Wiring cable H05 / 07V-K

LTC H07V-K 6,0 SW Cable 6 mm² black

Lieske Part No. 501243
Mfg Part No
EAN-Code
Manufacturer LTC
Here only 182,40 EUR
217,06 EUR incl. VAT

Further information for LTC H07V-K 6,0 SW Cable 6 mm² black

General
Nominal voltage450/750 V
Test voltage2500 V
Installation temperature range+5 °C - +70 °C
Temperature range after installation-30 °C - +70 °C
Operation temperature+70 °C
Bending radius15 x cable diameter
Flame retardancyaccording to VDE 0472 T. 804 test type B
Conductor materialbare copper, fine-stranded
Insulating materialPVC according to VDE 0207
Sheath colourin accordance with VDE 0293
Cross section6,0 mm²
The H07V-K 6,0 SW is a PVC-insulated single-core cable from manufacturer LTC, designed for installation in dry rooms as well as in control and distribution systems. It is suitable for installation in conduits, both above and below plaster, and in closed installation channels. The cable is primarily used for internal wiring of devices, control panels, and distributors, and can also be installed in and on lighting fixtures, provided the rated voltage does not exceed 1000 V AC or 750 V DC to earth. Direct installation on trays, troughs, or channels is not intended.

Applications
This cable is designed for use in indoor environments where a dry condition is guaranteed. It is commonly used in electrical installations where protected routing in conduits or channels is applied. Applications include wiring of electrical devices, enclosures, and distributors, with the cable being suitable for stable and safe power transmission due to its construction and insulation. Installation is carried out in closed systems to minimize mechanical stress and environmental influences.

Functions and Features in Detail
The cable consists of a bare, fine-stranded copper conductor, ensuring high electrical conductivity. Insulation is provided by PVC, specified according to VDE 0207, ensuring high electrical insulation and mechanical stability. The sheath color complies with the requirements of standard VDE 0293, ensuring uniform color coding in the electrical field. The cable is available in black, which is standard in electrical installations.

Technical Explanation
The rated voltage is 450/750 V, meaning the cable is designed for AC voltages up to 450 V and DC voltages up to 750 V. The test voltage of 2500 V serves quality control and ensures the insulation remains stable under increased voltage. The maximum operating temperature is +70 °C, with the cable tolerating temperatures from +5 °C to +70 °C during installation. After installation, it can withstand temperatures from -30 °C to +70 °C. The minimum bending radius is 15 times the cable diameter, allowing flexible installation without damaging the cable. Flame retardancy corresponds to test method B according to VDE 0472 Part 804 (equivalent to IEC 332-1), meaning the cable does not produce flames or flame propagation during a fire test.

Compatibility and Accessories
The cable is designed for use in standard installation systems and can be connected using common installation screws, terminals, and connection elements. It is compatible with other cables of type H07V-K and can be integrated into existing installations, provided voltage and cross-section specifications match. The use of appropriate connection elements is required to ensure a safe electrical connection.

Installation and Mounting
Installation is carried out in closed conduits or channels, with the cable not to be laid directly on unprotected surfaces. The installation must be performed to minimize mechanical stress and ensure bending radii are not exceeded. The cable is designed for installation in dry rooms and is therefore not suitable for damp or wet environments. Connections are made using suitable terminals or connection elements designed for the respective cross-section.

Operational Advantages
The H07V-K 6,0 SW offers high electrical conductivity due to the fine-stranded copper conductor and reliable insulation via PVC. Flame retardancy according to VDE 0472 Part 804, test method B, enhances operational safety. The cable is designed for long service life, as it does not show premature aging when installed and used under specified conditions. Color coding according to VDE 0293 facilitates identification and maintenance in electrical systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/501243
qrcode für LTC H07V-K 6,0 SW Cable 6 mm² black