| General |
| Nominal voltage | 450/750 V |
| Test voltage | 2500 V |
| Installation temperature range | +5 °C - +70 °C |
| Temperature range after installation | -30 °C - +70 °C |
| Operation temperature | +70 °C |
| Bending radius | 15 x cable diameter |
| Flame retardancy | according to VDE 0472 T. 804 test type B |
| Insulation | PVC according to VDE 0207 |
| Sheath colour | in accordance with VDE 0293 |
| Conductor | bare copper, fine-stranded |
| Protective conductor colour | Green/yellow |
The PVC-insulated single-core cable H07V-K 35,0 GNGE TR from LTC is a wiring cable designed for use in dry rooms, particularly in control and distribution systems. It is suitable for installation in conduits, both above and below plaster, as well as in closed installation channels. The cable is used for internal wiring of devices, control panels, and distributors, and is also intended for protected installation in and on luminaires. The maximum rated voltage is 1000 V AC or 750 V DC to earth. Direct installation on trays, gutters, or troughs is not intended.
Applications
This cable is designed for use in electrical installations in indoor environments where a dry condition is guaranteed. It is commonly used in industrial electrical installations, buildings with electrical distribution systems, and device wiring. Installation takes place in enclosed cable runs to minimize mechanical and environmental influences. The cable is not suitable for outdoor use or in damp areas.
Functions and Features in Detail
The single-core cable consists of a bare, fine-stranded copper conductor, ensuring high electrical conductivity. Insulation is provided by PVC, specified according to VDE 0207, to ensure sufficient electrical insulation and mechanical stability. The sheath color complies with VDE 0293 standards, with green/yellow (GNGE) designated for the protective conductor. This color coding is standardized and allows for clear identification of the protective conductor in electrical systems.
Technical Explanation
The rated voltage of 450/750 V defines the maximum voltage the cable can safely transmit. The test voltage of 2500 V serves as a test value to verify insulation strength. The cable can be installed at temperatures from +5 °C to +70 °C, with an operating temperature range of -30 °C to +70 °C after installation. The maximum operating temperature is +70 °C, indicating the thermal load capacity of the insulation. The minimum bending radius is 15 times the cable diameter to prevent mechanical damage during installation. Flame retardancy corresponds to VDE 0472 T. 804 test method B, which aligns with IEC 332-1, classifying the cable as flame retardant according to standards.
Compatibility and Accessories
The cable is designed for use in standard installation systems based on PVC-insulated cables. It is compatible with common cable lugs, connectors, and other connection elements designed for PVC insulation. The green/yellow color coding of the protective conductor allows for clear identification within the electrical system. Use in control panels and distributors follows applicable standards and regulations.
Installation and Mounting
Installation is carried out in enclosed cable runs, with the cable routed in conduits or channels. Installation must ensure minimum bending radii are maintained to preserve the mechanical integrity of the cable. Installation in dry rooms is mandatory, as the cable is not designed for damp or wet environments. Connections are made using suitable connection elements compatible with the insulation type (PVC).
Operational Advantages
The cable offers high electrical conductivity due to the fine-stranded copper conductor and reliable insulation via PVC. The flame-retardant design enhances operational safety. The distinct color coding of the protective conductor simplifies installation and maintenance. Installation in enclosed channels protects the cable from mechanical and environmental influences, increasing its lifespan and reliability. The cable is suitable for use in industrial and commercial facilities where stable and safe power supply is required.
Protection class, rated voltage, PVC insulation, VDE 0207, VDE 0293, IEC 332-1 are the key technical specifications defining the cable. The green/yellow color coding of the protective conductor is standardized according to VDE 0293 and enables clear identification in electrical systems. Flame retardancy according to IEC 332-1 (test method B) ensures enhanced safety in fire hazards. The rated voltage of 450/750 V is sufficient for most indoor installations, while the maximum operating temperature of +70 °C indicates the thermal load capacity. PVC insulation according to VDE 0207 provides adequate electrical and mechanical insulation. Installation in dry rooms is mandatory to ensure functionality and safety of the cable.