| General |
| Nominal voltage | 300/500 V |
| Test voltage | 2000 V |
| Installation temperature range | +5 °C - +70 °C |
| Temperature range after installation | -30 °C - +70 °C |
| Operation temperature | +70 °C |
| Bending radius | 15 x cable diameter |
| Flame retardancy | according to VDE 0472 T. 804 test type B (corresponds to IEC 332-1) |
| Conductor material | bare copper, fine-stranded |
| Insulation | PVC according to VDE 0207 |
| Sheath colour | in accordance with VDE 0293, green-yellow |
| Application | internal wiring of devices, protected installation in and on luminaires, in conduits, on and under plaster, only for bell and signaling systems |
The H05V-K 1.0 GNGE is a flexible PVC wiring cable from manufacturer LTC, designed for internal wiring of devices as well as for protected installations in and on luminaires, in conduits, on and under plaster. The cable is specifically designed for use in doorbell and signaling systems. It features a bare, fine-stranded copper conductor and PVC insulation in accordance with VDE 0207. The sheath color complies with VDE 0293 standards, with the green-yellow variant serving as the protective earth conductor (PE). The cable is rated for a nominal voltage of 300/500 V and has a test voltage of 2000 V, ensuring high electrical insulation strength. The maximum operating temperature is +70 °C, with installation required within a temperature range of +5 °C to +70 °C. After installation, the cable is suitable for temperatures from -30 °C to +70 °C. The minimum bending radius is 15 times the cable diameter, enabling flexible handling during installation. Flame retardancy corresponds to test method B according to VDE 0472 Part 804 (equivalent to IEC 332-1), ensuring limited flame spread in case of fire.
Applications
The cable is intended for use in protected indoor environments, particularly in electrical installations for devices, lighting systems, and signaling systems. It is suitable for installation in conduits, pipes, on or under plaster, with installation under plaster only permitted in protected areas. Due to its specific application in doorbell and signaling systems, the cable is not intended for general power distribution or outdoor use.
Functions and Equipment in Detail
The cable consists of a fine-stranded, bare copper conductor, providing high flexibility and good electrical conductivity. The PVC insulation ensures reliable electrical isolation and protects the conductor against mechanical and chemical influences. The green-yellow color coding corresponds to the standard for protective earth conductors, used for grounding devices and systems. The cable is rated for a nominal voltage of 300/500 V, making it suitable for use in low-voltage installations. The test voltage of 2000 V ensures insulation strength under load.
Technology Explained Simply
The designation H05V-K refers to a flexible, PVC-insulated single-core cable with a nominal voltage of 300/500 V. The marking 1.0 refers to the conductor cross-section in square millimeters. The abbreviation GNGE stands for green-yellow, describing the color of the protective conductor according to VDE 0293. The cable is designed for a maximum operating temperature of +70 °C, meaning it must not exceed this temperature under prolonged load. The minimum bending radius of 15 times the diameter allows flexible installation without damaging the conductor. Flame retardancy according to VDE 0472 Part 804, test method B (equivalent to IEC 332-1), means the cable spreads flame only limitedly in case of fire, increasing safety in buildings.
Compatibility and Accessories
The cable is suitable for use in standard installation systems, particularly in conjunction with sockets, switches, doorbell systems, and signaling devices. It can be installed in conduits and pipes, with installation under plaster only permitted in protected areas. The green-yellow color coding is standard for protective earth conductors, making it suitable for grounding systems. The cable is not intended for outdoor use or in damp environments, as no special protection rating such as IP67 is specified.
Installation and Mounting
The cable is intended for installation in protected indoor environments. Installation is carried out in conduits, pipes, on or under plaster, with installation under plaster only permitted in protected areas. Installation must occur within a temperature range of +5 °C to +70 °C. After installation, the cable is suitable for temperatures from -30 °C to +70 °C. The minimum bending radius is 15 times the cable diameter, enabling flexible installation. The cable is intended for use in doorbell and signaling systems, and therefore is not suitable for general power distribution.
Operational Advantages
The cable offers high flexibility due to the fine-stranded copper conductor, simplifying installation. The PVC insulation ensures reliable electrical isolation and protection against mechanical influences. The green-yellow color coding enables clear identification as a protective earth conductor, increasing safety during installation. Flame retardancy according to VDE 0472 Part 804, test method B (equivalent to IEC 332-1), ensures limited flame spread in case of fire. The cable is rated for a nominal voltage of 300/500 V, making it suitable for use in low-voltage installations. The maximum operating temperature of +70 °C ensures reliable performance under normal operating conditions.